High-Accuracy Digital Contact SensorGT2 series

GT2-E3P

Extension Board for GT2-100P

SPECIFICATIONS

Select Language

Model

GT2-E3P

Output

PNP output

Mounting method

Installed into GT2-100N/100P
(up to 3 boards)

Main unit/expansion unit

-

Power supply voltage

Supplied from GT2-100N/100P

Power
consumption

Normal

4200 mW max. (30 V, 140 mA max.)*1

Power saving (Eco)

4000 mW max. (30 V, 133.3 mA max.)

Display power

Measured value display

Other displays

Display range

Display resolution

Sampling rate

1000 times/sec.

Control input

Timing/preset/
reset/bank input

No-voltage input

Control output

HH/HI/GO/LO/LL

PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less

Response time

hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s

Power supply/I/O cable

I/O: 30-pin connector (MIL standard)

Environmental
resistance

Ambient temperature

-10 to +50°C 14 to 122°F (No freezing)

Relative humidity

35 to 85% RH (No condensation)

Vibration

10 to 55 Hz, 1.5 mm 0.06", double amplitude, 2 hours in each of X, Y, and Z directions

Materials

Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET

Weight

Approx 80 g

*1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode.
*2 When 2 or more sensor heads are connected, 20 mA or less.

Contact Sensor Tips

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Measurement Sensors