High-Accuracy Digital Contact SensorGT2 series

GT2-PA12L

Stylus type Air cylinder type General-purpose Sensor head (Low measuring force type)

SPECIFICATIONS

Select Language

Model

GT2-PA12L

Detection system

Scale Shot System II, absolute (no tracking errors) type

Measuring range

12 mm 0.47"

Resolution

0.5 µm 0.02 Mil

Indicated accuracy

2 µm0.08 Mil(P-P)*1

Measuring force

Downward mounting

0.4N*2

Side mounting

0.35N*2

Upward mounting

0.3N*2

Sampling cycle

4ms

Applied pressure range

0.05MPa to 0.07MPa

Pressure resistance

0.5 MPa

Fluid used

Clean dry air

Operation indicator light

2-color LED (red, green)

Environmental
resistance

Enclosure rating

-

Ambient temperature

0 to 55°C 32 to 131°F(No freezing)

Relative humidity

35 to 85% RH (No condensation)

Vibration

10 to 55 Hz Double amplitude 1.5 mm 0.06"in the X, Y, Z axis directions respectively, 2 hours

Environmental resistance

Impact resistance

1000m/s2 (IEC60068-2-27)

Materials

Main body

Main body case: SUS 303, Status indicator: PET,
Sensor head-relay connector cable: PUR, Relay connector: PBT

Contact

SUS304, SUS440C*3

Sensor head cable

Optional (connect to relay connector)

Weight

Approx 35 g (not including cable)*4

*1 Value when the ambient temperature is 20°C.
*2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot.This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L.
*3 Contacts are available as options sold separately.
*4 Including the relay connector.

Contact Sensor Tips

Latest / Most Downloaded

    • General Catalog Request
    • Trade Shows and Exhibitions
    • eNews Subscribe

    Measurement Sensors