LK-G5000 series : Specifications

Model	Single unit type	LK-G5001V	LK-G5001PV	LK-HA100
	Separate type	LK-G5001/LK-HD500	LK-G5001P/LK-HD500
Type		Single unit type		-
Designation		Main controller		Head expansion unit
Sensor head compatibility		Compatible
No. of connectable sensor heads		2		1
Display (LK-HD500)	Minimum display unit	0.001 μm 0.0001 Mil		-
	Display range	±999.999 μm to ±9999.99 mm ±9.99999 Mil to ±99.9999" (7 settings selectable)
	Display cycle	Approx. 10 times/sec.
Display interface	Display port	Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
	LED indicator	LASER ON		POWER ON, STABILITY, BRIGHT, DARK
Terminal block^*1	Analog voltage output	±10 V output, Output impedance: 100 Ω
	Analog current output	4 to 20 mA, Maximum load resistance: 350 Ω
	No. of analog outputs	2		1
	TIMING1 input^*3	Non-voltage input	Voltage input	-
	RESET1 input^*3
	Auto-zero1 input^*3
	Laser control input^*4
	Laser remote input	Non-voltage input
	Alarm output	NPN open-collector output	PNP open-collector output
	General comparator output
Expansion connector^*1	TIMING input	Non-voltage input	Voltage input
	RESET input
	Auto-zero input
	Program switch input
	Binary selection input
	Alarm output	NPN open-collector output	PNP open-collector output
	Comparator output
	Binary output
RS-232C interface		Baud rate: 9600 to 115200 bps Data length: 8 bits Stop bit length: 1 bit Parity: None/even/odd
USB interface		USB 2.0 Hi-Speed compliant^*5
Ethernet interface^*2		100Base-TX/10Base-T
Head expansion unit connector		Up to 10 head expansion units can be connected to one main controller
Expansion unit connector		Either of the CC-Link unit (LK-CC100) or DeviceNet unit (LK-DN100) can be connected		-
Power supply	Power supply voltage	24 VDC±10%		24 VDC±10% (Supplied from the controller)
	Maximum current consumption	0.6 A or less with 1 head/3.5 A or less with 12 heads
Environment resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to 50°C (32 to 122˚F) When two or more head expansion units are connected: 0 to 40°C (32 to 104˚F)
	Relative humidity	35 to 85%RH (No condensation)
Weight		Approx. 600 g		Approx. 300 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual. ^2 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. ^3 This input is applied to all of the synchronized OUT. ^4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.) When the laser class 2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited. ^*5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down.

Model

LK-H008W

LK-H025

LK-H027

LK-H055

LK-H057

LK-H085

LK-H087

LK-H155

LK-H157

Mounting mode

Specular reflection

Diffuse reflection

Reference distance

8 mm 0.32"

20 mm 0.79"

50 mm 1.97"

80 mm 3.15"

150 mm 5.91"

Measurement range^*1

±0.5 mm ±0.02"

±3 mm ±0.12"

±10 mm ±0.39"

±18 mm ±0.71"

±40 mm ±1.57"

Light source

Type

Red semiconductor laser

Wavelength

655nm

Laser class

IEC 60825-1

Class 1

Class 3R

Class 2

Class 3R

Class 2

Class 3R

Class 2

Class 3R

Class 2

FDA(CDRH)21CFR Part 1040.10

Class II

Class IIIa

Class II

Class IIIa

Class II

Class IIIa

Class II

Class IIIa

Class II

Output

0.3 mW

4.8 mW

0.95 mW

4.8 mW

0.95 mW

4.8 mW

0.95 mW

4.8 mW

0.95 mW

Spot diameter (at reference distance)

20 μm×550 μm

25 μm × 1400 μm

50 μm × 2000 μm

70 μm × 2500 μm

120 μm × 4200 μm

Linearity^*2

±0.05% of F.S. (F.S.= 1 mm 0.04")

±0.02%of F.S. (F.S.= 6 mm 0.24")

±0.02% of F.S. (F.S.= 20 mm 0.79")

±0.02% of F.S. (F.S.= 36 mm 1.42")

±0.02% of F.S. (F.S.= 80 mm 3.15")

Repeatability^*3

0.005 μm (0.001 μm)

0.02 μm (0.01 μm)

0.025 μm

0.1 μm

0.25 μm

Sampling cycle

2.55/5/10/20/50/100/200/500/1000 μs (9 steps selectable)

Temperature fluctuation

0.02% of F.S./°C (F.S.=1 mm 0.04")

0.01% of F.S./°C (F.S.= 6 mm 0.24")

0.01% of F.S./°C (F.S.= 20 mm 0.79")

0.01% of F.S./°C (F.S.= 36 mm 1.42")

0.01% of F.S. (F.S.= 36 mm 1.42")

0.01% of F.S./°C (F.S.= 80 mm 3.15")

0.01% of F.S. (F.S.= 80 mm 3.15")

Environment resistance

Enclosure rating

IP67

Ambient light

Incandescent lamp or fluorescent lamp: 10000 lux max.

Incandescent lamp or fluorescent lamp: 5000 lux max.

Ambient temperature

0 to +50°C (32 to 122˚F) ^*4

0 to +50°C (32 to 122˚F)

0 to +50°C (32 to 122˚F) ^*4

Relative humidity

35 to 85%RH (No condensation)

Vibration resistance

10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively

Material

Aluminum die-cast

Weight

Approx. 240 g

Approx. 230 g

Approx. 260 g

Approx. 280 g

Approx. 300 g

^*1 Measurement range when the sampling cycle is 20 μs or more.
^*2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode.
^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical example of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 μs.
^*4 When the ambient temperature rises to 40°C (104°F) or more, mount this on a metal plate before use.

Model

LK-H008

LK-H020

LK-H022

LK-H050

LK-H052

LK-H080

LK-H082

LK-H150

LK-H152

Mounting mode

Specular reflection

Diffuse reflection

Reference distance

8 mm 0.32"

20 mm 0.79"

50 mm 1.97"

80 mm 3.15"

150 mm 5.91"

Measurement range^*1

±0.5 mm ±0.02"

±3 mm ±0.12"

±10 mm ±0.39"

±18 mm ±0.71"

±40 mm ±1.57"

Light source

Type

Red semiconductor laser

Wavelength

655nm

655 nm

655nm

Laser class

IEC 60825-1

Class 1

Class 3R

Class 2

Class 3R

Class 2

Class 3R

Class 2

Class 3R

Class 2

FDA(CDRH)21CFR Part 1040.10

Class II

Class IIIa

Class II

Class IIIa

Class II

Class IIIa

Class II

Class IIIa

Class II

Output

0.3 mW

4.8 mW

0.95 mW

4.8 mW

0.95 mW

4.8 mW

0.95 mW

4.8 mW

0.95 mW

Spot diameter (at reference distance)

φ20μm

φ25 μm

φ50 μm

φ70 μm

φ120 μm

Linearity^*2

±0.05% of F.S. (F.S.= 1 mm 0.04")

±0.02% of F.S. (F.S.= 6 mm 0.24")

±0.02% of F.S. (F.S.= 20 mm 0.79")

±0.02% of F.S. (F.S.= 36 mm 1.42")

±0.02% of F.S. (F.S.= 80 mm 3.15")

Repeatability^*3

0.005 μm (0.001 μm)

0.02 μm (0.01 μm)

0.025 μm

0.1 μm

0.25 μm

Sampling cycle

2.55/5/10/20/50/100/200/500/1000 μs (9 steps selectable)

Temperature fluctuation

0.02% of F.S./°C (F.S.=1 mm 0.04")

0.01% of F.S./°C (F.S.= 6 mm 0.24")

0.01% of F.S./°C (F.S.= 20 mm 0.79")

0.01% of F.S./°C (F.S.= 36 mm 1.42")

0.01% of F.S. (F.S.= 36 mm 1.42")

0.01% of F.S./°C (F.S.= 80 mm 3.15")

0.01% of F.S. (F.S.= 80 mm 3.15")

Environment resistance

Enclosure rating

IP67

Ambient light

Incandescent lamp or fluorescent lamp: 10000 lux max.

Incandescent lamp or fluorescent lamp: 5000 lux max.

Ambient temperature

0 to +50°C (32 to 122˚F) ^*4

0 to +50°C (32 to 122˚F)

0 to +50°C (32 to 122˚F) ^*4

Relative humidity

35 to 85%RH (No condensation)

Vibration resistance

10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively

Material

Aluminum die-cast

Weight

Approx. 240 g

Approx. 230 g

Approx. 260 g

Approx. 280 g

Approx. 300 g

^*1 Measurement range when the sampling cycle is 20 μs or more.
^*2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode.
^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical example of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 μs.
^*4 When the ambient temperature rises to 40°C (104°F) or more, mount this on a metal plate before use.

Model

LK-H008

LK-H008W

LK-H022K

LK-H027K

LK-H052K

LK-H057K

LK-H082

LK-H087

LK-H152

LK-H157

Mounting mode

Specular reflection

Specular reflection^*5

Reference distance

8 mm 0.32"

16.1 mm 0.63"

46.3 mm 1.82"

76.7 mm 3.02"

147.5 mm 5.81"

Measurement range^*1

±0.5 mm ±0.02"

±2.8 mm ±0.11"

±5.2 mm ±0.20"

−17.6 mm to +14.5 mm -0.69" to +0.57"

−39.5 mm to +24.4 mm -1.56" to +0.96"

Light source

Type

Red semiconductor laser

Wavelength

655nm

Laser class

IEC 60825-1

Class 1

Class 2

FDA(CDRH)21CFR Part 1040.10

Class II

Output

0.3 mW

0.95 mW

Spot diameter (at reference distance)

φ20μm

20 μm×550 μm

φ25 μm

25 μm×1400 μm

φ50 μm

50 μm×2000 μm

φ70 μm

70 μm × 2500 μm

φ120 μm

120 μm × 4200 μm

Linearity^*2

±0.05% of F.S. (F.S.= 1 mm 0.04")

±0.02% of F.S. (F.S.= 6 mm 0.24")

±0.02% of F.S. (F.S.= 20 mm 0.79")

±0.02% of F.S. (F.S.= 36 mm 1.42")

±0.02% of F.S. (F.S.= 80 mm 3.15")

Repeatability^*3

0.005 μm (0.001 μm)

0.02 μm (0.01 μm)

0.025 μm

0.1 μm

0.25 μm

Sampling cycle

2.55/5/10/20/50/100/200/500/1000 μs (9 steps selectable)

Temperature fluctuation

0.02% of F.S./°C (F.S.=1 mm 0.04")

0.01% of F.S./°C (F.S.= 6 mm 0.24")

0.01% of F.S. (F.S.= 20 mm 0.79")

0.01% of F.S. (F.S.= 36 mm 1.42")

0.01% of F.S. (F.S.= 80 mm 3.15")

Environment resistance

Enclosure rating

IP67

Ambient light

Incandescent lamp or fluorescent lamp: 10000 lux max.

Incandescent lamp or fluorescent lamp: 5000 lux max.

Ambient temperature

0 to +50°C (32 to 122˚F) ^*4

0 to +50°C (32 to 122˚F)

0 to +50°C (32 to 122˚F) ^*4

Relative humidity

35 to 85%RH (No condensation)

Vibration resistance

10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively

Material

Aluminum die-cast

Weight

Approx. 240 g

Approx. 230 g

Approx. 260 g

Approx. 280 g

Approx. 300 g

^*1 Measurement range when the sampling cycle is 20 μs or more.
^*2 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured in the normal measurement mode.
^*3 This value is obtained when the KEYENCE standard target (White diffuse workpiece or workpiece with a metal mirror surface only for the LK-H008/LK-H008W) is measured at the reference distance with the number of averaging measurements set to 16384. The value in parentheses is a typical example of a measurement with the number of averaging measurements set to 65536 and the sampling cycle to 200 μs.
^*4 When the ambient temperature rises to 40°C (104°F) or more, mount this on a metal plate before use.
^*5 Use one of the following dark filters when measuring a transparent or mirror surface object: LK-H082/LK-H087: LK-F3, LK-H152/LK-H157: LK-F2

Model		LK-CC100
Designation		CC-Link communication unit dedicated to LK-G5000 Series
Network connection	Supported CCLink^*1 version	Ver. 1.10 (Extended cyclic setting: Single) Ver. 2.00 (Extended cyclic setting: Double or more)^*2
	Master unit	CLPA-certified master unit (CC-Link Ver. 2.00/Ver. 1.10)
	No. of occupied stations	1 to 4
	Communication speed	156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps, 10 Mbps
	Connection cable	Dedicated CC-Link cable supporting Ver. 1.10 (Shielded 3-core twisted-pair cable: OP-79426, OP-79427)
	Maximum total cable extension length	156 kbps: 1200 m 3937', 625 kbps: 900 m 2952.7', 2.5 Mbps: 400 m 1312.3', 5 Mbps: 160 m 524.93', 10 Mbps: 100 m 328.08'
	Station type	Remote device station
Environment resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to 50°C (32 to 122°F). When two or more head expansion units are connected: 0 to 40°C (32 to 104°F).
	Relative humidity	35 to 85 %RH (No condensation)
Rated voltage		24 VDC±10 % (supplied from controller)
Current consumption		200 mA max.
Weight		Approx. 300 g
^1 CC-Link is a registered trademark of Mitsubishi Electric Corporation. ^2 The LK-G5000 Series supports the "extended cyclic transmission" and "station-to-station cable length relaxation" of CC-Link Ver. 2.00.

Model		LK-DN100
Designation		DeviceNet communication unit dedicated to LK-G5000 Series
Network connection	Communication protocol	DeviceNet^*1 compliant
	Master unit	ODVA-certified master unit
	Transmission speed	500 kbps, 250 kbps, 125 kbps
	Device type	Generic
	Transmission medium	Dedicated 5 cables (2 signal cables, 2 power supply cables, 1 shielding cable)
	Maximum trunk line cable length	Thick cable: 500 m 1640.4' (at transmission speed of 125 kbps)/250 m 820.21' (at 250 kbps)/ 125 m 410.11' (at 500 kbps) Thin cable: 100 m 328.08' (at all transmission speed settings)
	Communication type	I/O communication (Poll) Explicit message communication
	Power supply	11 VDC to 25 VDC
	Current consumption	10 mA max. (when network power supply 24 V is applied)
Environment resistance	Ambient temperature	When one or less head expansion unit is connected: 0 to 50°C (32 to 122°F). When two or more head expansion units are connected: 0 to 40°C (32 to 104°F).
	Relative humidity	35 to 85%RH (No condensation)
Rated voltage		24 VDC ±10% (supplied from controller)
Current consumption		200 mA max.
Weight		Approx. 300 g
^*1 DeviceNet is a registered trademark of ODVA (Open DeviceNet Vendor Association).

Model		LK-HD1001
Name		LK-G5000 Series Touch Panel Display
Display panel	Display elements	TFT color LCD
	Display color	32,768 colors
	Pixels (W x H pixels)	640 × 480
	Display area (W x H mm)	170.9 × 128.2 6.73' x 5.04'
	Service life (normal temperature and humidity)	Approx. 50,000 hours
Backlight lamp	Type	Cold-cathode tube (replaceable)
	Service life	Approx. 40,000 hours
Touch switch	Number of switches	40 x 30 per 1 image
	Mode	Matrix resistance membrane mode
	Operating force	0.98N or less
	Service life	More than one million times
Communication function		Available only with the LK-G5000 Series
Structure		Panel built-in type, IP65f equivalent dust-proof, waterjet-proof on only front panel
Operating environment		Limit dust and corrosive gas
Ambient temperature		0 to 50°C (32 to 122°F)
Ambient humidity		35 to 85%RH (no condensation) When the ambient temperature is higher than 40°C (104°F), limit the absolute humidity to 85%RH at 40°C (104°F).
Storage temperature		-10 to +60°C (14 to 140°F) (no freezing)
Storage humidity		35 to 85%RH (no condensation) When the ambient temperature is higher than 40°C (104°F), limit the absolute humidity to 85%RH at 40°C (104°F).
Vibration resistance		10 to 57 Hz, 0.3 mm 0.01" double amplitude/57 to 500 Hz, 2G, 3 hours in each direction (X, Y, and Z)
Weight		Approx. 1250 g
Rated voltage		24 VDC ±10%
Current consumption		1 A or less

Model	CB-A07	CB-A2	CB-A5	CB-A10	CB-A20	CB-A30
Cable length	0.7 m 2.30'	2 m 6.56'	5 m 16.40'	10 m 32.81'	20 m 65.62'	30 m 98.43'
Weight	Approx. 100 g	Approx. 200 g	Approx. 400 g	Approx. 750 g	Approx. 1400 g	Approx. 2000 g