Surface Scanning Laser Confocal Displacement Meter

LT-9000 series

Transparent Targets

Unbeatable Performance in Automation and Sensing Applications.

Transparent thickness and surface condition check

Transparent Thickness Measurement

Transparent Target Thickness Measurement

The LT-9000 series measure the surface condition, film thickness, and thickness of transparent objects. In addition, the slant correction function enables more reliable measurements.The intermediate layer of an optical disc can also be accurately measured.

Measure resistive element film thickness

Measure Film Thickness

Measuring Resistor Film Thickness

The LT-9000 Series surface scanning laser confocal displacement meter is used to measure the film thickness of the resistive element on hybrid chip resistors.Measurement can be performed with a maximum of 0.01 Mil (0.3 µm) resolution.Due to the unique high-accuracy surface scanning method, the LT-9000 Series can stably measure the thickness without being affected by the materials in the surface of the ceramic and the resistive element surface.

Non contact transparent coating thickness measurement”

Transparent Coating Measurement

Transparent Coating Measurement

The LT-9000 Series surface scanning laser confocal displacement meter is used to measure the thickness of the transparent coating on a board without physical contact.Measurement can be performed with a maximum of 0.01 Mil (0.3 µm) resolution.Due to the unique high-accuracy surface scanning method, the LT-9000 Series can capture the front and rear surfaces of the transparent target to measure the thickness. In addition, the accuracy does not vary depending on the surface condition or material.

Measurement Library

Latest / Most Downloaded

    • General Catalog Request
    • Trade Shows and Exhibitions
    • eNews Subscribe

    Measurement Sensors