High-speed 2D Optical MicrometerTM-3000 series

TM-3000

Controller

SPECIFICATIONS

Select Language

Model

TM-3000

Head compatibility

Compatible

Number of connectable sensors

2 units max.*1

Display

Minimum display unit

0.01 μm, 0.001 mm2, 0.01°

Maximum display range

±9999.99 mm ±393.7", ±99999.9 mm2, ±99999.9°

Input terminal block

Laser remote interlock input

Non-voltage input*2

Trigger input (for Head A)

Timing 1 input

Auto-zero 1 input

Reset input

Output terminal block

Analog voltage output

±10 V x 2 outputs, out put impedance: 100 Ω*2

Total judgment output

NPN open-collector output*2

Error output

NPN open-collector output (N.C.)*2

Process output

NPN open-collector output*2

Trigger input enable output

Adjusted error output

Expansion connector

Trigger input (for Head A)

Non-voltage input*2

Timing 2 input

Auto-zero 2 input

Program switching input

Non-voltage input, 4 inputs*2

Memory card save input

Non-voltage input*2

Judgment/Binary output

3-level judgment output: OUT1 to OUT16, total judgment output
Binary output: OUT1 to OUT16 measured data output (21 bits)
NPN open-collector output*3

Strobe output

NPN open-collector output*2

Trigger input enable output

Analog RGB monitor output

SVGA (800 x 600 pixels)

RS-232C interface

Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)

USB interface

In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)

Ethernet interface

1000BASE-T/1000 BASE-TX/10 BASE-T

Memory card

SD card CA-SD4G (4GB), CA-SD1G (1GB) support

Rating

Power voltage

24 VDC ±10%, Ripple: 10% (P to P) or less

Current consumption.

1 head connected 480mA max./ 2 heads connected 550mA max.

Environmental resistance

Operating temperature range

0 to 50°C 32 to 122°F

Operating ambient humidity

35 to 85% RH (No condensation)

Material

Polycarbonate

Weight

Approx 1120 g

*1 1 or 2 units can be connected only with the same head model
*2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA)
• The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less
• Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.)
• Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA)
*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA)
• The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less
• Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.)
• Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Tips of Measurement

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Measurement Sensors