Two-color Digital Display Pressure SensorAP-30 series

AP-33PA

Main Unit, Positive-pressure Type, 1 Mpa, PNP

SPECIFICATIONS

Select Language

Model

AP-33PA

Type

Positive pressure analog

Output

PNP output

Rated pressure

0 to 145.0 PSI

Type of pressure

Gauge pressure, air or non-corrosive gases

Fluid type

Air or non-corrosive gases

Display resolution

0.2 Psi, 0.001 MPa,
0.01 kgf / cm2, 0.01 bar

Display range

-15% to +110% of F.S.

Response time (chatterprevention function)

2.5/5/100/500 ms (selectable)

Display power

3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43")

I/O

Control output

Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, N.O./N.C. switchable (with two outputs.)

Analog output

1 to 5 V (Load impedance: 47 kΩ min.)

Zero-shift input

Control output hysteresis

Variable (when hysteresis mode is selected), 0.5% of F.S. in standard mode

Rating

Power voltage

12 to 24 VDC ±10%

Current consumption.

50 mA (at 24 V), 90 mA (at 12 V)

Environmental resistance

Operating temperature range

0 to 50°C 32 to 122°F, no freezing

Operating ambient humidity

35 to 85% RH (No condensation)

Vibration

10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively

Pressure resistance

217.5 PSI

Material

Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable

Accessories

Mounting bracket A, mounting bracket B, hexagon socket head cap plug

Weight

Approx.120 g

Latest / Most Downloaded

    • General Catalog Request
    • Trade Shows and Exhibitions
    • eNews Subscribe

    Process Controls / Process Sensors