AP-C30 series

Ultra-compact Digital Pressure Sensor

Model	NPN		AP-C30K	AP-C31K	AP-C33K
	PNP		AP-C30KP	AP-C31KP	AP-C33KP
Type			Multi range	Negative pressure	Positive pressure
Rated pressure range			Negative pressure mode:0 to -29.9inchHg,Positive pressure mode:0 to 29.5inchHg,Compound pressure mode:+29.9 to -29.9inchHg	0 to -29.9 inchHg	0 to 145 PSI
Proof pressure			72.5 PSI		217.5 PSI
Fluid type			Air or non-corrosive gases
Pressure type			Gauge pressure
Power supply voltage			12 to 24 VDC ±10% with ripple (p-p) of 10% max.
Power consumption	12 V	Normal	720 mW (60 mA) max.
		Economical mode	480 mW (40 mA) max.
	24 V	Normal	960 mW (40 mA) max.
		Economical mode	720 mW (30 mA) max.
Display			3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43") Display cycle: 10 times/s
Set and display range ^*1			-10 to +110% of F.S.	-15 to +110% of F.S.
Operation indicator			Red LED x 2 (corresponding to control output 1 and 2)
Resolution			Negative pressure:0.1 inchHg,Positive pressure:0.1 inchHg,Compound pressure:0.1 inchHg	0.1 inchHg(Normal mode),0.01 inchHg(Focus mode)	0.2 PSI(Normal mode),0.02 PSI(Focus mode)
Repetitive precision			±0.2% of F.S.
Hysteresis ^*2			Variable (Standard: 0.5% of F.S.)
Display temperature characteristic			±1% of F.S. max.
Response time (chattering prevention function)			2.5, 5, 100, or 500 ms (selectable)
Control output			NPN open collector 100 mA max. (40 V) residual voltage 1 V max., 2 outputs (N.O. /N.C. selectable)
Analog output			1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
Zero-shift input			Non-voltage input (contact or SSR) with input time of 2 ms or more. (or analog output selectable)
Ambient temperature			0 to 50°C (32 to 122°F), No condensation
Relative humidity			35 to 85%, No condensation
Vibration resistance			10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively
Pressure port			NPT 1/8 180° rotation
Material			Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting
Weight			Approx. 30 g (without cable) Approx. 85 g (with 2-m 6.6' cable)
Accessory			Power supply cord (2-m 6.6' cable with connector)		Power supply cord (2-m 6.6' cable with connector),Unit seal
^1 The focus range applies while in focus mode only. ^2 A standard of 0.2% of FS applies while in focus mode.