Wire-saving AI Digital Pressure SensorAP-V40 series

AP-V42AW

Amplifier Unit, Expansion Unit, NPN

SPECIFICATIONS

Select Language

Model

AP-V42AW

Output

NPN output

Applicable sensor head

AP-41M, AP-41, AP-43, AP-44

Display power

4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18") AI indicator (green) Display cycle: 10 times/s

Set and display range

-15 to +110% of F.S. *1

Operation indicator

Red LED x 2 (corresponding to control output 1 and 2)

Resolution

Standard mode

AP-41M

0.1kPa, 1mmHg, 0.1 inchHg, 0.01psi, 0.001bar

AP-41

AP-43

0.01 kgf/cm2

AP-44

0.1kPa, 1mmHg, 0.1 inchHg, 0.02psi, 0.001bar

AP-48

0.1 kPa, 0.001 kgf/cm2, 0.02 psi, 0.001 bar

Focus mode

AP-41M

0.01 inchHg

AP-41

AP-43

0.02 PSI

AP-44

0.02 kPa, 0.2 mmHg, 0.01 inchHg, 0.004 psi, 0.2 mbar

AP-48

0.02kPa, 0.2gf/cm2, 0.004psi, 0.2mbar

Repeatability

±0.2% of F.S. or less

Hysteresis

Variable (Standard: 0.5% of FS; high-resolution/focus mode: 0.1% of F.S.)

Response time
(chattering prevention function)

1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) *2

I/O

Control output

NPN open collector 100 mA max. (at 40 V or below) *3 with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)

Display temperature characteristic

±1% of F.S. max.

I/O

Analog output (selectable)

Zero-shift input (selectable)

Unit expansion

Rating

Power voltage

12 to 24 VDC ±10% with ripple (p-p) of 10% max.

Power consumption

At 12 V

Normal

See below.

Eco mode

480mW (40mA) or less

At 24 V

Normal

960mW (40mA) or less

Eco mode

720mW (30mA) or less

Ambient temperature

0 to 50°C 32 to 122°F, no freezing

Relative humidity

35 to 85%RH (no condensation)

Vibration

10 to 55 Hz, 1.5 mm 0.06" double amplitude in X, Y, and Z directions, 2 hours respectively

Material

Polycarbonate

Accessories

End Unit,Head Connector, and Expansion Seal

Weight

Approx. 80 g (with 2-m 6.6' cable)

*1 The focus range applies while in focus mode only.
*2 A response time of 100 or 500 ms applies if the AP-47 is used.
*3 The maximum current is 20 mA if the AP-V42W (P) is installed as an expansion unit.

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Process Controls / Process Sensors