Fiber Photoelectric Sensors

FS series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Digital Fiber Optic Sensors - FS-N series

Fiber Amplifier, Cable Type, PNP FS-T22P

FS-T22P - Fiber Amplifier, Cable Type, PNP

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model

FS-T22P

Type

Auto

Product name

Cable length

Allowable bending radius

Light source

Red LED

Sensitivity adjustment

Button

Detecting distance (standard detection object)

Spot diameter

Minimum detectable object

Response time

500 µs

Hysteresis

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: red LED, calibration: yellow LED, received light intensity and sensitivity allowance: green LED*1

Timer function

ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

External tuning input signal

Input time: 40 ms or more

Output

PNP output

Control output

PNP open-collector 100 mA max. (30 V max.), Residual voltage 1 V max.

Stability output

PNP open-collector 50 mA max. (30 V max.), Residual voltage 1 V max.

Protection circuit

Reversed polarity protection, Overcurrent protection, Surge absorber

Laser emission stop input

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

50 mA

Environmental resistance

Ambient light

Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.

Ambient temperature

-10 to +55 °C 14 to 131 °F (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Material

Polycarbonate

Weight

Approx. 75 g

*1 This indicates stable operation and that sensitivity settings cannot be made.

Data Sheet (PDF) Other Models