Fiber Photoelectric SensorsFS series

FS2-65P

Fiber Amplifier, Cable Type, PNP

SPECIFICATIONS

Select Language

Model

FS2-65P

Type

Trimmer:Hohe Ansprechgeschwindigkeit

Light source

Red LED

Sensitivity adjustment

8-turn trimmer

Response time

50 μs

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: Red LED
Stable operation: Green LED

Timer function

ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

External calibration input signal

Buzzer mode

Buzzer ON when control output turns ON/Buzzer ON when alarm output turns ON/Buzzer OFF (switch-selectable)

Output

PNP output

Control output

PNP open-collector 100 mA max. (30 V max.), Residual voltage 1 V max.

Stability output

PNP open-collector 50 mA max. (30 V max.), Residual voltage 1 V max.

Protection circuit

Reversed polarity protection, Overcurrent protection, Surge absorber

Rating

Power voltage

12 to 24 VDC ±10%, Ripple (P-P): 10% max.

Current consumption.

35 mA or less

Environmental resistance

Operating ambientluminance

Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.

Operating temperature range

-10 to 55°C 14 to 131°F, No freezing

Operating ambient humidity

35 to 85% RH (No condensation)

Vibration

10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis

Shock resistance

500 m/s2 in X, Y and Z directions, 3 times respectively

Material

Polycarbonate

Weight

Approx 61 g

Fiber Unit Finder

  • Fiber Unit Finder
  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors