RGB Digital Fiberoptic Sensors

CZ series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Fiber type Cable type - LR-WF10

Amplifier Unit, Main Unit, NPN CZ-K1

CZ-K1 - Amplifier Unit, Main Unit, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

  • CE Marking

Specifications

Model

CZ-K1

Output

NPN

Light source

Red LED, Green LED, Blue LED

Response time

300 µs/1 ms (switch-selectable)

Indicator lamp

Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED,
Matching rate/received light intensity: LCD (Red/Green)

Error indication

Excess light intensity, insufficient light intensity, insufficient color difference

Calibration method

1-point/2-point calibration (switch-selectable)

Tolerance value adjustment

Numerical value setting on digital display

Differentiation mode

C mode/C + I mode/I mode (switch-selectable)

Timer function

OFF-delay timer (40 ms)/Timer OFF (switch-selectable)

Output selection

Match output: Turns on when target color matches registered color.
Mismatch output: Turns on when target color is different from registered color. (switch-selectable)

External synchronization input

Response speed: 500 µs max.

External calibration input

Input response time: 20 ms min.

Registered color selection

8-bank selection (By external input),
Non-voltage input, Input response time: 20 ms min.

Control output

NPN: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max.

Protection circuit

Reverse-polarity protection (power supply),
overcurrent protection (output), surge absorber (output)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

75 mA or less

Environmental resistance

Ambient light

Incandescent lamp: 5,000 lux max., Sunlight: 10,000 lux max.

Ambient temperature

-10 to +55 °C 14 to 131 °F (No freezing)*1

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Polycarbonate

Weight

Approx. 115 g (including 2-m 6.6' cable)

*1 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected.
When 3 to 10 units: -10 to +50 °C 14 to 122 °F
When 11 to 16 units: -10 to +45 °C 14 to 113 °F
When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

Data Sheet (PDF) Other Models