Revolutionizing general-purpose photoelectric sensorsPR-G series


Rectangular Thrubeam M8 3-pin Connector Type, 30 m


Select Language









Cable connection

M8 connector (3 pin)

Detecting distance

30 m 98.43'

Number of control outputs

2 (Dark-ON +Light ON)*1

Output operation

Output 1


Output 2

Response time

1 ms

Sensitivity adjustment

One-turn trimmer (230°)

Spot diameter

Light source

4 elements, Red LED (631 nm)

Light interference prevention function

Indicator lamp

Transmitter: power supply indicator (green)
Receiver: output indicator (yellow),
Stable operation indicator (green)

Control output

PNP open collector
30 VDC or less, 100 mA or less
Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA

Stop emission input

Non-voltage input
Input time ON: 1 ms or more,
OFF: 20 ms or more

Protection circuit

Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection


Power voltage

10 to 30 VDC including Ripple ±10% (P-P), Class 2

Power consumption

Transmitter: 450 mW max.
(15 mA max. at 24 V, 15 mA max. at 12 V)
Receiver: 360 mW max.
(12 mA max. at 24 V, 15 mA max. at 12 V)

Environmental resistance

Enclosure rating

IP68 (IEC60529), IP69K (DIN40050-9),
4X, 6P, 13 (NEMA250)*2

Operating ambientluminance

Incandescent lamp 5,000 lux or less, sunlight: 20,000 lux or less

Operating temperature range

-20 to +70°C -4 to 158°F (No freezing) *3

Ambient temperature for storage

-20 to 70°C -4 to 158°F

Operating ambient humidity

35 to 85% RH (No condensation)

Shock resistance

1000m/s2 in X, Y, Z axis directions respectively 6 times


10 to 55Hz Compound amplitude 1.5 mm 0.06" XYZ 2 hours for each axis

Insulation resistance

20 MΩ or more (500 VDC)

Withstand voltage

1000 VAC 50/60 Hz 1 min


Case: SUS 316L,
Indicator cover: PES,
7-segment display cover/Lens cover: PMMA (scratch-resistant coating)
M18 nut: Brass (Nickel plating),
Lock washer: Steel (Chrome plating)


Instruction manual


Approx 55 g

*1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output.
*2 For the connector type, the enclosure rating varies depending on the cable that is used.
*3 When the ambient temperature is 60°C 140°F or higher, the device should be powered with no more than 24 VDC and 50 mA.

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe