Self-Contained Miniature Photoelectric SensorPR-M/F series


Mini-slim Transmissive M8 Connector Type, 1.2m


Select Language









Detection distance

1.2 m

Cable connection

M8 connector (3 pin)

Number of control outputs

1 outputs*1

Output operation

Output 1

Output 2


Response time

Output 1

Output 2

ON→OFF: 2.7 ms, OFF→ON: 0.5 ms*1

Sensitivity adjustment


Spot diameter

Light source

4 element, point light source, red LED (650 nm)

Mutual interference prevention function

Indicator lamp

Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)

Control output

30 VDC or lower, 50 mA or lower
Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower.
When 0.2 kΩ load resistance, 1.5 mA or lower
Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.

Protection circuit

Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection


Power voltage

10 to 30 VDC including 10% ripple (P-P)

Current consumption.

Transmitter: 11 mA
Receiver: 16 Ma


Enclosure rating

IP67 (IEC 60529), IP69K (DIN 40050-9), 4X, 6P, 13 (NEMA 250)

Ambient Light

Incandescent lamp 5,000 lx or lower, sunlight: 20,000 lx or lower

Ambient temperature

-25 to +55°C -13 to 131°F (no freezing)

Ambient storage temperature

-25 to +75°C -13 to 167°F

Ambient humidity

35 to 85% RH (no condensation)

Shock resistance

1,000 m/s2, X, Y, Z each direction 6 times

Vibration resistance

10 to 55 Hz, double amplitude 1.5 mm 0.06", X, Y, Z each direction 2 hours

Insulation resistance

20 MΩ or higher (500 VDC)

Withstand voltage

1,000 VAC 50/60Hz 1min


Case: SUS 316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin


Instruction Manual


Approx. 26 g

*1 The number of control outputs for the M8 connector (3 pin) type is 1 output. If "D" is at the end of the model code, the sensor is equipped with a Dark-ON output.
If "L" is at the end of the model code, the sensor is equipped with a Light-ON output.
Example: The PR-M51C3PL has a Light-ON output (output 2). (The response time also becomes the output 2 response time)

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

Latest / Most Downloaded

    • General Catalog Request
    • Trade Shows and Exhibitions
    • eNews Subscribe