Multi-voltage power supply,built-in amp.photoelectric sensorsPW series


Reflective Main Unit


Select Language




Diffuse-refl ective:with timer

Detecting distance

1 m 3.3' (with 200 x 200 mm 7.87" white mat paper)

Light source

Infrared LED

Detectable object

Opaque and transparent materials


20% max. of detecting distance
(150 mm 5.91" min. detecting distance)

Sensitivity adjustment

1-turn trimmer (240°)

Response time

20 ms max.

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: Red LED

Timer function

0.1 to 5 s *1

Control output

SPST-NO relay contact, 250 VAC 3 A max., 30 VDC 3 A max. (resistive load)

Noise resistance

Square-wave noise by noise simulator: 1 kV p-p, 1 μs (across power terminals)


Power voltage

24 to 240 VAC ±10%, 50/60 Hz, 12 to 240 VDC ±10%

Power consumption

3 VA max.

Environmental resistance

Insulation resistance

20 MΩ min. (between each terminal and case, using insulation resistance metre of 500 VDC)

Enclosure rating


Operating ambientluminance

Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.

Operating temperature range

-10 to 60°C 14 to 140°F (No freezing)

Operating ambient humidity

35 to 85% RH (No condensation)


10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis

Shock resistance

100 m/s2 in X, Y, and Z directions, 3 times respectively


Housing: PBT, Lens: acrylic, Terminal cover: Polysulfone


Approx 100 g

*1 ON-delay, OFF-delay, and One-shot modes are selectable.

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe