Built-in amplifier photoelectric sensors

PZ series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Rectangular Reflective Cable Type, PNP - PZ-G42P

Square Reflective Cable Type, PNP PZ-42LP

PZ-42LP - Square Reflective Cable Type, PNP

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model

PZ-42LP

Type

Diffuse-reflective model (short range), L model

Detecting distance

8 cm (10 × 10 cm white mat paper)

Light source

Infrared LED

Detectable object

Transparent and opaque materials

Hysteresis

20% max. of detecting distance

Sensitivity adjustment

1-turn trimmer (240°)

Response time

1 ms max. (2 ms in alternate frequency mode)

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: red LED, stable operation: green LED

Output

Control output

Maximum PNP open-collector output: 100 mA or less (40 V or less)

Stability output

Protection circuit

Reversed polarity, overcurrent protection, surge absorber

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

30 mA or less

Environmental resistance

Enclosure rating

IP67

Ambient light

Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less

Ambient temperature

-20 to +55 °C -4 to 131 °F (No freezing)

Relative humidity

35 to 85 % RH

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Case material

Fiberglass reinforced plastic

Weight

Approx. 75 g (including 2-m 6.6' cable)

Data Sheet (PDF) Other Models