IA series

CMOS Analog Laser Sensor

Head
Amplifier unit

Head

Model		IA-030	IA-065	IA-100
Reference distance		30 mm 1.18"	65 mm 2.56"	100 mm 3.94"
Measurement range		20 to 45 mm 0.79" to 1.77"	55 mm to 105 mm 2.17" to 4.13"	75 mm to 130 mm 2.95" to 5.12"
Light source	Type	Red semiconductor laser, wavelength: 655 nm (visible light)
	Laser class	Class 1 (FDA (CDRH) Part1040.10)^*4 Class 1 (IEC 60825-1)	Class II (FDA (CDRH) Part1040.10) Class 2 (IEC 60825-1)
	Output	220 μW	560 μW
Spot diameter (at standard distance)		Approx. 200 × 750 μm 7.89 x 29.53 Mil	Approx. 550 × 1750 μm 21.65 x 68.9 Mil	Approx. 400 × 1350 μm 15.75 x 53.15 Mil
Linearity ^*1		±0.1% of F.S. (F.S.=±5 mm 0.20", 25 to 35 mm 0.98" to 1.38")	±0.1% of F.S. (F.S.=±10 mm 0.39", 55 to 75 mm 2.17" to 2.95")	±0.15% of F.S. (F.S.=±20 mm 0.79", 80 to 120 mm 3.15" to 4.72")
Repeatability ^*2		2 μm 0.08 Mil	4 μm 0.16 Mil	10 μm 0.39 Mil
Sampling rate		0.33/1/2/5 ms (4 levels available)
Operation status indicators		Laser warning: Green LED, Analog output: Red LED, Measurement center: Green LED
Temperature characteristics		0.05% of F.S./°C (F.S.=±5 mm 0.20", 25 to 35 mm 0.98" to 1.38")	0.06% of F.S./°C (F.S.=±10 mm 0.39", 55 to 75 mm 2.17" to 2.95")	0.06% of F.S./°C (F.S.=±20 mm 0.79", 80 to 120 mm 3.15" to 4.72")
Environmental resistance	Enclosure rating	IP67
	Ambient light ^*3	Incandescent lamp: 5000 lux	Incandescent lamp: 7500 lux
	Ambient temperature	-10 to +50°C (14 to 122°F) (No condensation or freezing)
	Relative humidity	35 to 85% RH (No condensation)
	Vibration	10 to 55 Hz, Double amplitude 1.5 mm 0.06" in the X, Y and Z directions, 2 hours respectively
Material		Housing material: PBT Metal parts: SUS304 Packing: NBR Lens cover: Glass Cable: PVC
Weight (including cable)		Approx. 120 g	Approx. 130 g
^1 Value when measuring the KEYENCE standard target (white diffuse object). ^2 Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 16. ^3 Value when the sampling rate is set to 2 ms or 5 ms. ^4 The classification is implemented based on IEC 60825-1 following the requirement of Laser Notice No.50 of FDA(CDRH).

Page Top

Amplifier unit

Model		IA-1000
Display rate		Approx. 10 times/sec
Minimum displayable unit		1 μm 0.04 Mil (IA-030) · 2 μm 0.08 Mil (IA-065/IA-100)
Display range		-99.999 to 99.999 mm -3.94" to 3.94" (IA-030) · -99.998 to 99.998 mm -3.94" to 3.94" (IA-065/IA-100)
Analog output voltage		0.5 to 4 V, Output impedance 100 Ω
Control input^*1	Bank switch input	Non-voltage input
	Zero-shift input
	Stop emission input
Power supply	Power voltage	10 to 30 VDC Ripple (P-P) 10% included
	Power consumption	1500 mW max. (at 30 V; 50 mA max.)
Environmental resistance	Ambient temperature	-10 to +55°C (14 to 131°F) (No condensation or freezing)
	Relative humidity	35 to 85% RH (No condensation)
	Vibration	10 to 55 Hz, Double amplitude 1.5 mm 0.06" in the X, Y and Z directions, 2 hours respectively
Material		Front sheet: Polycarbonate Key tops: Polyacetel Cable: PVC
Weight (including cable)		Approx. 110 g
^*1 Either bank switching input or zero shift input can be is used. The rated non-voltage input is: ON voltage, 2 V or less; OFF current, 0.05 mA or less.