IB series

Laser Thrubeam Sensor

Sensor heads
Amplifier unit

Sensor heads

Model		IB-01	IB-05	IB-10	IB-30
Light source	Wavelength	660 nm (Visible light semiconductor laser)
	Laser Class	Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10) ^*4
	Output	170 μW
	Pulse duration	30 μs
Installation distance		0 to 2000 mm 78.74"	0 to 300 mm 11.81"
Measurement range		φ1 mm φ0.04" (Installation distance 0 to 300 mm 11.81") φ1 to 2.5 mm (Installation distance 300 to 2000 mm 11.81" to 78.74")	5 mm 0.20"	10 mm 0.39"	30 mm 1.18"
Sampling rate		12,500 times/sec. (80 μs)
Minimum detection target ^*1		φ8 μm φ0.31 Mil (Installation distance 0 to 300 mm 11.81") φ8 to 50 μm φ0.31 to 1.97 Mil (Installation distance 300 to 2000 mm 11.81" to 78.74")	φ0.05 mm φ0.002"	φ0.1 mm φ0.004"	φ0.2 mm φ0.01"
Repeatability ^*2		5 μm 0.20 Mil (distance 0 to 300 mm 11.81")	5 μm 0.20 Mil		10 μm 0.39 Mil
Temperature characteristics ^*3		±0.2% of F.S./°C	±0.1% of F.S./°C (±5 μm 0.20 Mil)	±0.1% of F.S./°C (±10 μm 0.39 Mil)	±0.1% of F.S./°C (±30 μm 1.18 Mil)
Operating indicators		Laser emission warning indicator: green LED
Environmental resistance	Operating ambient luminance	Incandescent lamp: 5000 lux Solar light: 10000 lux	Incandescent lamp: 5000 lux Solar light: 5000 lux	Incandescent lamp: 10000 lux Solar light: 10000 lux
	Operating ambient temperature	0 to +40°C (32 to +104°F) (no freezing)	0 to +50°C (32 to +122°F) (No freezing)
	Relative humidity	35 to 85%RH (No condensation)
	Vibration	Amplitude 1.5 mm 0.06" 2 hr each for X, Y and Z axes
Material	Housing	PBT	Galvanized die cast
	Lens cover	Glass
	Cable	PVC (2 m 6.6')
Weight		Approx. 140 g	Approx. 180 g	Approx. 220 g	Approx. 510 g
^1 Value when measuring the target (white diffuse object) at the middle of the transmitter and receiver position, and at the center of the measurement range. ^2 When distance between transmitter and receiver is set to 300 mm 11.81", and light is half-shielded at a position 150 mm 5.91" from receiver. Deflection width (±2σ) when sampled for 30 seconds with an average number of times set to 64 times. ^3 When distance between transmitter and receiver is set to 100 mm 3.94" and full light is received. ^4 The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50.

Page Top

Amplifier unit

Model		IB-1000	IB-1500	IB-1050	IB-1550
Amplifier type		DIN rail mount	Panel mount	DIN rail mount	Panel mount
Main unit/Expansion unit		Main unit		Expansion unit
Head compatibility		Yes
Display	Display resolution	0.01%, 0.1%, 1% (switchable)
	Display range	–99.999 to 99.999, –99.99 to 99.99, –99.9 to 99.9, –99 to 99 (switchable)
	Digital display method	Dual 7-segment display Upper level:5 red digits Lower level: 5 green digits	Dual 7-segment display Upper level: 2-color (green/red) 5 digits Lower level: 5 green digits	Dual 7-segment display Upper level: 5 red digits Lower level: 5 green digits	Dual 7-segment display Upper level: 2-color (green/red) 5 digits Lower level: 5 green digits
	Operating indicators	Judgment indicator: 2-color (green/red) LED (HI, GO, LO), Bank indicator: Green LED x 4, Laser emission warning indicator: Green LED, Others: Green LED x 8, red LED x 3
Analog voltage output ^*1		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100Ω		N/A
Analog current output ^*1		4 to 20 mA Maximum load resistance 350Ω
Control input ^*2	Bank switching input	Non-voltage input
	Zero shift input
	Laser emission stop input
	Timing input
	Reset input
	Adjust input
Control output ^*3	Judgment output	Open collector (NPN/PNP switchable, N.O./N.C. switchable)
	Check output
Power supply	Power voltage	10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS		Supplied from main unit
	Power consumption ^*4	1950 mW or less (at 30 V, 65 mA max.)	2100 mW or less (at 30 V, 70 mA max.)	1950 mW or less (at 30 V, 65 mA max.)	2100 mW or less (at 30 V, 70 mA max.)
Environmental resistance	Operating ambient temperature	-10 to +50°C (-50 to +122°F) (No freezing)
	Operating ambient humidity	35 to 85% RH (No condensation)
	Vibration	10 to 55 Hz, double amplitude 1.5 mm 0.06", 2 hours each for X, Y, Z axes
	Pollution degree	2
Materials		Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight (including accessories)		Approx. 150 g	Approx. 170 g	Approx. 140 g	Approx. 165 g
^1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected. ^2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less ^3 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less ^4 The power consumption with slave units installed is the total of each amplifier unit’s power consumption. Example: When using one master unit (IB-1000) with two slave units (IB-1050) (1950 mW X 1) + (1950 mW X 2) = 5850 mW