Pattern Matching SensorAI series

AI-B100

Built-in Amplifier Model: 100mm

SPECIFICATIONS

Select Language

Model

AI-B100

Installation Distance

90 to 110 mm 3.54 to 4.33"

Detection Area

1X Zoom to
4X Zoom

8 × 8 mm 0.31 × 0.31" to 32 × 32 mm 1.26 × 1.26"*1

Digital Zoom

1X to 4X (17 steps) adjustment, zoom position adjustment*1

Light Receiving Element

BW CMOS

Transmitter

Light Source

Red LED (660 nm)

Lighting Method

Pulse lighting

Detection Modes

Presence check mode / Difference check mode / Feeder mode

Response Time

Switchable between 3 ms/10 ms/20 ms/50 ms/100 ms

Timer

OFF/Off-delay/On-delay/One-shot

Bank Function

Bank slots: Up to 2

Other Functions

Filter, orientation detection, anti-blur, hysteresis, mutual interference prevention, indicator LED color change,
screen display orientation, statistics display, failure hold display, key lock function, I/O test

Display Panel

Organic LED (OLED) display

Languages

Japanese/English/Chinese (Simplified)

Indicators

Main Indicator

1 (green/red/orange)

I/O Indicators

2 indicators (red): OUT1/OUT2 or IN

Input

Type

Non-voltage input/voltage input can be switched
Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit)
Voltage input: Maximum input rating 30 V, ON current 18 V or higher, OFF current 0.1 mA or lower, ON current 2 mA or lower (at 30 V)

Number of
Inputs

1: IN or no input*2

Functions

Assignable functions: Bank/Hold (level)/Hold (edge)/Reset/External calibration/Interference prevention/Light off

Output

Type

Open collector output: Can be switched between NPN/PNP and N.O./N.C.
Maximum rating: 30 V 50 mA, remaining voltage 2 V or lower

Number of
Inputs

1: OUT1 or 2: OUT1/OUT2*2

Functions

Assignable functions for OUT2: Error output/Judgment output 2/Interference prevention output (sync-output)

Communication Functions

IO-Link: Specification v. 1.1 (1.0)/COM2 (38.4 kbps)

Rating

Power voltage

20 to 30 VDC, including Ripple (P-P) 10 %

Current consumption

0.3 A or less (power voltage at 20 V, excluding the output load)

Environmental resistance

Enclosure rating

IP67*3

Ambient temperature

-10 to +50 °C 14 to 122 °F (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of 6 directions

Materials

Main unit case: Zinc die-cast/PBT; Front cover: Acrylic (hard coating); Operation indicator: TPU;
Button: POM; Display sheet: PET; Polarizing filter body: POM

Weight

Approx. 120 g (including polarized filter)

*1 When positioned in the midpoint of the installation distance range.
*2 Used with OUT2 or IN assigned to I/O line (white line or 2nd pin of M12 connector).
*3 Except when polarized filters or dome filters are mounted.

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors