IV series

Vision Sensor

Sensor
Monitor
Software

Sensor

Model		IV-500CA	IV-500C	IV-500MA	IV-500M	IV-150MA	IV-150M	IV-2000MA	IV-2000M
Type		Standard distance				Short range		Long range
Installed distance		(50 to 500 mm) (1.97" to 19.69")				(50 to 150 mm) (1.97" to 5.91")		(300 to 2000 mm) (11.81" to 78.74")
View		Installed distance 50 mm 1.97" : 25 (H) x 18 (V) mm 0.98"(H) x 0.71"(V) to Installed distance 500 mm 19.69" : 210 (H) x 157 (V) mm 8.27"(H) x 6.18"(V)				Installed distance 50 mm 1.97" : 12 (H) x 9 (V) mm 0.47"(H) x 0.35"(V) to Installed distance 150 mm 5.91": 36 (H) x 27 (V) mm 1.42"(H) x 1.06"(V)		Installed distance 300 mm 11.81": 45 (H) x 33 (V) mm 1.77"(H) x 1.30"(V) to Installed distance 2000 mm 78.74": 300 (H) x 225 (V) mm 11.81"(H) x 8.86"(V)
Image sensor		1/3 inch color CMOS		1/3 inch monochrome CMOS
Image sensor	Pixel	752 (H) x 480 (V)
Focus adjustment		Auto^*6	Manual	Auto^*6	Manual	Auto^*6	Manual	Auto^*6	Manual
Exposure time		1/10 to 1/50000		1/10 to 1/25000		1/20 to 1/25000		1/10 to 1/25000
Lights	Illumination	White LED		Red LED				Infrared LED
	Lighting method	Pulse lighting/DC lighting is switchable
Tools	Type	Outline search, Area, Position adjustment
	Number^*4	Detection tools : 16 tools, Position adjustment tool : 1 tool
Switch settings (programs)		32 programs
Image history^*1	Numbers	100 images		300 images
	Condition	NG only/All is selectable
Analysis information^*2		OFF/Statistics/Histograms is switchable Statistics : Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgment results list by tool Histograms : Histogram, matching degree (latest value, MAX, MIN, AVE)
Other functions		HDR, HighGain, Color filters^7, Digital zoom^8, Brightness correction, Tilt correction, White balance^*7, Mask outline, Mask area, Test run, ToolAutoTune, Input monitor, Output test, Security settings
Indicators		PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input		Non-voltage input/voltage input is switchable For non-voltage input : ON voltage 2V or lower, OFF current 0.1mA or lower, ON current 2mA (short circuit) For voltage input : Maximum input rating 26.4V, ON voltage 15V or higher, OFF current 0.2mA or lower, ON current 2mA (for 24V)
Input	Inputs	6 inputs (IN1 to IN6)
	Function	IN1 : External trigger, IN2 to IN6 : Enable by assigning the optional functions Assignable functions : Program switching, Clear error, External master image registration
Output		Open collector output NPN/PNP is switchable, N.O./N.C. is switchable For open collector NPN output : Maximum rating 26.4V 50mA, remaining voltage 1.5V or lower For open collector PNP output : Maximum rating 26.4V 50mA, remaining voltage 2V or lower
Output	Outputs	4 outputs (OUT1 to OUT4)
	Function	Enable by assigning the optional functions Assignable functions : Total judge result, BUSY, Error, Position adjustment result, Judge result of each tool
Ethernet^*3	Standard	100BASE-TX/10BASE-T
	Connector	M12 4pin connector
Rating	Power voltage	24VDC ± 10% (including ripple)
	Current consumption	0.6A or less
Environmental resistance	Ambient temperature	0 to +50 ˚C 32 to 122F˚ (No freezing)
	Relative humidity	35 to 85%RH (No condensation)
	Vibration	10 to 55 Hz, 1.5 mm 0.06" double amplitude, 2 hours each for X, Y, and Z axes
	Shock resistance	500m/s² 6 different directions in 3 times
	Enclosure rating^*5	IP67
Material		Main unit case : Aluminum die-casting, Packing : NBR, Front Cover : Acrylic, Mounting adapter : POM
Weight		Approx. 270 g
^1 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H). ^2 This can be displayed on the intelligent monitor (IV-M30) or by software for IV (IV-H1). ^3 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1). ^4 Tools can be installed by programs. ^5 Except when polarized filter attachment (OP-87436/OP-87437) is mounted ^6 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. Focusing position can be registered by program. ^7 Color type only. ^8 Monochrome type only.

Page Top

Monitor

Model		IV-M30
Display		3.5" TFT color LCD 320 x 240 dot (QVGA)
Backlight	Method	White LED
	Duration	Approx. 50000 hours (25 ˚C)
Touch panel	Method	Analog resistive
	Actuating force	0.8 N or less
Indicators		PWR, SENSOR
Ethernet ^*1	Standard	100BASE-TX/10BASE-T
	Connector	M12 4pin connector
Languages		Japanese / English
Expanded memory		USB memory ^*3
Rating	Power voltage	24VDC ± 10% (including ripple)
	Current consumption	0.2 A or lower
Environmental resistance	Ambient temperature	0 to + 50˚C 32 to 122F˚ (No freezing)
	Relative humidity ^*2	35 to 80 % RH (No condensation)
	Vibration	10 to 55 Hz, 0.7 mm 0.03" double amplitude, 2 hours each for X, Y, and Z axes
	Drop impact resistance	1.3 m 4.27' over the concrete (2 times each in the arbitrary direction)
	Enclosure rating	IP40
Material		Polycarbonate
Weight		Approx. 180 g
^1 This is dedicated for connection with IV-series sensor. ^2 If the ambient temperature is over 40˚C, use it in the absolute humidity of 40˚C 80% RH or lower. ^*3 Use the KEYENCE recommended product.

Page Top

Software

Model		IV-H1
System requirements	Interface	Equip the Ethernet (100BASE-TX) interface
	OS	Windows 7 Home Premium/Professional/Ultimate^*1 Windows XP Professional/HomeEdition; either of OS above needs to be pre-installed
	Languages	Japanese/English/German/Simplified Chinese/Traditional Chinese
	Processor	Windows 7: needs to be compliant with system requirements for OS Windows XP: Pentium III or better, Clock speed 1 GHz or faster
	Memory capacity	Windows 7: needs to be compliant with system requirements for OS Windows XP: 512 MB or more (1 GB or more is recommended)
	Required capacity for installation	1 GB or more
	Monitor	Resolution 1024 x 768 pixel or higher, Display: High Color (16bit) or higher
	Operating conditions	.NET Framework 2.0 SP2 needs to be installed ^*2
^1 Supported for 32bit and 64bit version. ^2 If .NET Framework 2.0 is not being installed, this will be automatically installed at the time of IV-H1 installation.