Lenses (for Machine Vision)

CA-L series

Catalogs View Catalog

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

High resolution, Low distortion Vibration-resistant Lens 50 mm CA-LH50G

CA-LH50G - High resolution, Low distortion Vibration-resistant Lens 50 mm

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model

CA-LH50G

Type

Vibration-resistant models

Compatible image sensor size

2/3"

Focal point

50 mm 1.97"

F-stop range (aperture)

F2.8/4/8/16*1

Minimum WD

0.2 m 0.7'*2

Resolving power

100 cycles/mm (center), 80 cycles/mm (periphery)

Filter size

27.0 mm 1.06" P0.5

TV distortion

-0.03 % (-0.01 %)*3

Mount

C-mount

Environmental resistance

Ambient temperature

0 to +50 °C 32 to 122 °F

Relative humidity

35 to 80 % RH (No condensation)

Weight

Approx. 76 g

*1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture.
*2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out.
*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Data Sheet (PDF) Other Models