Programmable Logic ControllerKV Nano series

KV-NC32ETP

Expansion output unit 32-output Transistor (source) output Connector type

SPECIFICATIONS

Select Language

Model

KV-NC32ETP

Expansion output unit

External connectionmethod

MOSFET output
With overcurrent protection function*1*2

External connection method

Connector

Rated load

30 VDC, 0.2 A*3

Leakage current (when output is OFF)

100µA or less

Residual voltage (at ON)

0.6 VDC or less

ON resistance

Minimum applicable load

Common method

32 points/1 common
(2 terminals)*4*5

Response time

OFF to ON

100 µs or less
(with a load of 1 mA or more)

ON to OFF

200 µs or less
(with a load of 1 mA or more)

Relay life

Relay replacement

Internal current consumption

50mA or less

Weight

Approx. 110 g

*1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for
all outputs within the shared common*4,*5,until the cause of the problem is removed.
*2 Transistor (sink) output types (ending in ET) use MOSFET (N-ch) output. Transistor (source) output types (ending in ETP) use MOSFET (P-ch) output.
*3 Rated load of each common is 1.6 A.
*4 The KV-NC16ET(P) and KV-NC32ET(P) COM terminals are shorted internally.
*5 For KV-NC32ET(P), the outputs within the shared common that are protected when overcurrents are detected, are outputs 000 to 015, or outputs 100 to 115.

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Controls