Recent Searches
    Series ()
      Models ()
        Keywords

          High-Accuracy Digital Contact SensorGT2 series

          GT2-100P

          Amplifier Unit, Large Display Amplifier

          SPECIFICATIONS

          Select Language

          Model

          GT2-100P

          Output

          PNP output

          Mounting method

          Panel mount/Screw mounting using optional mounting bracket

          Main unit/expansion unit

          -

          Power supply voltage

          20 to 30 VDC, including 10 % ripple (P-P), Class 2

          Power consumption

          Normal

          4,500 mW max. (30 V, 150 mA max.)

          Power saving (Eco)

          3,600 mW max. (30 V, 120 mA max.)*1

          Display power

          Measured value display

          6 + 1/2-digit 7-segment LED (red)

          Other displays

          2-color, 13-level bar LED display (red, green), indicators (red, green)

          Display range

          -199.999.9 to 199.999.9

          Display resolution

          0.1 μm 0.004 Mil

          Sampling rate

          1,000 times/sec.

          Control input

          Timing/preset/
          reset/bank input

          No-voltage input

          Control output

          HH/HI/GO/LO/LL

          PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less

          Response time

          hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s

          Environmental resistance

          Ambient temperature

          -10 to +50 °C 14 to 122 °F (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 0.15 mm 0.006", 2 hours in each of the X, Y, and Z directions

          Materials

          Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET

          Power supply/I/O cable

          Power supply: Terminal block, I/O: 20-pin connector (MIL standard)

          Weight

          Approx. 380 g

          *1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode.
          *2 When 2 or more sensor heads are connected, 20 mA or less.

          Contact Sensor Tips

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors