Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          3D Interference Measurement Sensor

          WI-5000 series

          Select Language

          Model

          WI-001*1*2*3

          WI-004*1*2*3

          WI-010*1*2*3

          Reference distance

          18 mm 0.71"

          Measurement range

          Z

          1.4 mm 0.06" (Standard Mode), 0.7 mm 0.03" (High Speed Mode)

          XY

          1 × 1 mm 0.04" × 0.04"

          4 × 4 mm 0.16" × 0.16"

          10 × 10 mm 0.39" × 0.39"

          Minimum detection area

          4 × 4 µm 0.000157" × 0.000157"

          15 × 15 µm 0.000591" × 0.000591"

          40 × 40 µm 0.001575" × 0.001575"

          Repeatability (height difference)

          0.1 µm 0.000004"*4

          Linearity (height difference)

          ±2.8 µm 0.000110"(±0.2% of F.S., F.S. = 1.4 mm 0.06", +20 to +30°C +68 to +86°F)*5

          Light source for measurement

          Type

          Infrared SLD

          Center wavelength

          830 nm

          Laser class (IEC60825-1)

          Class 3R

          Output

          3.6 mW

          Guide light source

          Type

          Red semiconductor laser

          Wavelength

          660 nm

          Laser class (IEC60825-1)

          Class 1

          Output

          0.15 mW

          Sampling frequency

          Internal Trigger

          133 ms (High Speed Mode), 266 ms (Standard Mode)

          External Trigger

          266 ms max. (High Speed Mode), 532 ms max. (Standard Mode)*6

          Environmental resistance

          Ambient light

          Incandescent lamp/fluorescent lamp: 5,000 lux max.

          Ambient temperature

          0 to +35 °C 32 to 95 °F

          Relative humidity

          20 to 85 % RH (No condensation)

          Weight

          Approx. 3,000 g

          *1 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50.The resolution of the height (distance from head reference plane to measurement workpiece) is 1 µm(*2).
          *2 This is ±3 σ value (Auto Maintenance Mode is OFF) when the average height of a single rectangular area(*3) has been measured for 30 seconds using a KEYENCE standard target.
          *3 The rectangular size is WI-001 : 0.3 mm × 0.9 mm 0.01" × 0.04", WI-004 : 1.1 mm × 3.7 mm 0.04" × 0.15", WI-010 : 3 mm × 9 mm 0.12" × 0.35".
          *4 This is σ value (Auto Maintenance Mode is OFF, Capture Timing is “Prioritize Accuracy”) when the average height difference of two rectangular areas(*3) has been measured for 30 seconds using a KEYENCE standard target.
          *5 This is the value (Auto Maintenance Mode is OFF, Capture Timing is “Prioritize Accuracy”) when the average height difference of two rectangular areas(*3) has been measured using a KEYENCE standard target.
          *6 The workpiece stopping time at capturing is 120 ms (High Speed Mode) or 240 ms (Standard Mode).

          Model

          WI-5000

          No. of connectable sensor heads

          1

          No. of registration settings

          Up to 1000 settings on SD Card 1 and SD Card 2 individually (depending on the capacity and configuration of the SD Card),external switching possible

          No. of measurement tools

          100 tools/setting (20 are intended for position adjustment)

          Measurement mode

          Height

          Height Measurement, Height Difference Measurement, Arranged Multi-Point Height Measurement, Free Multi-Point Height Measurement, Profile Measurement, and Continuous Height Measurement

          Dimension measurement

          Measure Distance, Measure Width, Line/Angle, Detect Circle, and Detect Point

          Auxiliary function

          Calculation, Image Region Generator, Line Display, Circle Display, Point Display, and Scale Display

          Interface

          Control input

          20 (Input terminal: 5, Parallel I/O: 15)

          Control output

          28 (Output terminal block: 6, Parallel I/O: 22)
          Photo MOSFET*1

          RS-232C

          Value output and control I/O (cannot be used when PLC link using the RS-232C port is in use)

          PLC-Link

          Value output and control I/O using the Ethernet port or RS-232C port (cannot be used when EtherNet/IPTM is in use.
          RS-232C No-protocol communication cannot be used when the RS-232C port is in use)

          Ethernet

          Value output and control I/O
          In addition to the functions above, uploading/downloading inspection settings, various simulations, and transmission/reception/remote connection of image and other data are possible when KEYENCE's PC application software is connected.
          FTP client/server function supported, VNC server function (supporting monitor screen display only on clients other than a PC), and BOOTP function supported
          1000BASE-T/100BASE-TX/10BASE-T

          USB

          In addition to value output and control I/O, uploading/downloading inspection settings, various simulations, and transmission/reception/remote connection of image and other data are possible when KEYENCE's PC application software is connected.
          Dedicated USB 2.0

          EtherNet/IPTM

          Value I/O and control I/O using the Ethernet port (cannot be used when PLC-Link is in use)
          Cyclic communication supported (up to 1436 bytes), message communication supported
          Max. number of connections: 32
          Conforms to Conformance test Version CT12.

          Mouse

          Menus can be operated with the optional dedicated mouse (OP-87506, included with the controller).

          USB HDD

          Image and other data can be output when a HDD (2 TB max.) is connected to the dedicated USB port (conforms to USB3.0, bus power supported: rated output 900 mA)

          Monitor output

          Analog RGB output XGA 1024 × 768 (24-bit color, 60 Hz)

          Minimum display unit

          0.1 µm, 0.001°, 0.0001 mm2, 0.00001 mm3

          Display language

          English/Japanese/Chinese (simplified)/Chinese (traditional)/Korean selectable (Initial language should be determined during the initial startup.)

          Rating

          Maximum current consumption

          2.7 A

          Power voltage

          24 VDC ±10 %

          Environmental resistance

          Ambient temperature

          0 to +45 °C 32 to 113 °F (DIN rail mounting), 0 to +40 °C 32 to 104 °F (bottom mounting)

          Relative humidity

          35 to 85 % RH (No condensation)

          Weight

          Approx. 2,000 g

          *1 Either positive common connecting which is compatible with NPN input devices, or negative common connecting which is compatible with PNP input devices is feasible.

          Model

          WI-S1

          XY stage moving range

          X axis: 75 mm 2.95", Y axis: 50 mm 1.97"

          XY stage tilt angle

          ±2°

          Z stage moving range

          Coarse movement: 64 mm 2.52", fine movement: 2.0 mm 0.08"

          Dimensions(excluding moving parts)

          231 (W) x 408 (H) x 360 (D) mm 9.09" (W) x 16.06" (H) x 14.17" (D)

          Weight

          Approx. 10 kg

          Model

          WI-C3

          WI-C5

          WI-C10

          WI-C3L

          WI-C5L

          WI-C10L

          WI-C3R

          WI-C5R

          WI-C10R

          Type

          Sensor head connecting cable, Standard

          Sensor head connecting cable, Hi-flex robotic

          Cable end

          Straight

          L-shaped

          Straight

          Length

          3 m 9.84'

          5 m 16.40'

          10 m 32.81'

          3 m 9.84'

          5 m 16.40'

          10 m 32.81'

          3 m 9.84'

          5 m 16.40'

          10 m 32.81'

          Tips of Measurement

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors