Recent Searches
    Series ( results)
      Models ( results)
        Keywords
          1. Home
          2. Products
          3. Measurement Sensors
          4. Laser Profiler(2D/3D)
          5. 2D/3D Laser Profiler
          6. Models
          7. 2D controller

          2D/3D Laser ProfilerLJ-X8000 series

          2D controller

          LJ-X8000E

          SPECIFICATIONS

          Select Language

          Model

          LJ-X8000E*1

          Head input

          Up to 2 head units
          Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads
          *When using 2 units, heads A and B are the same model.

          Sampling cycle (trigger interval)

          Maximum speed of 1 kHz (1 ms)*2

          Number of registered inspection settings

          Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible

          Master profile / number of reference images

          Maximum 200 per setting per head (depends on SD card capacity)

          Memory card

          SD card slot × 2
          Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB)
          *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E

          Number of tools

          100/setting (of those, 20 are for misalignment correction)

          Interface

          Control input

          20 points (input terminal block: 5 points, parallel I/O: 15 points)

          Control output

          28 points (output terminal block: 6 points, parallel I/O: 22 points)
          Photo MOSFET*3

          RS-232C

          Value output and control I/O (exclusive use with PLC link using an RS-232C port)
          Supports baud rates up to 230,400 bps

          PLC link

          Value output using Ethernet port or RS-232C port, and control I/O
          (Exclusive use with Ethernet/IPTM. When using an RS-232C port,exclusive use with RS-232C no-procedure communication)

          Ethernet

          Value output and control I/O
          In addition to the above functions, can upload/download inspection settings, perform various simulations,send/receive various data including profile and image data,and be used with remote connection programs via KEYENCE PC application software
          Supports FTP client and FTP server functions
          Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported)
          Supports BOOTP functions
          1000BASE-T/100BASE-TX/10BASE-T

          USB

          Can output values (3D mode only), upload/download inspection settings, perform various simulations,send/receive various data including profile and image data,and be used with remote connection programs via KEYENCE PC application software
          Dedicated USB 2.0

          Ethernet/IPTM

          Value I/O and control I/O using Ethernet port (exclusive use with PLC link)
          Supports cyclic communication (max. 1436 bytes) and message communication
          Maximum Connections: 32
          Conforms to Version.CT15 conformance test

          Mouse

          Various menus can be controlled via the dedicated mouse (included with the controller)

          SNTP

          Automatic correction of date and time for this unit is possible by connecting to an SNTP server

          USB HDD

          By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0,
          bus-powered, rated output: 900 mA), profile, image and other data can be output

          Monitor output

          Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)

          Encoder input

          1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)

          Response frequency

          RS-422

          Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz

          Open collector (OC)

          Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz

          Laser ON input

          Non-voltage input (Shorted with short pin when shipped from factory)

          Cooling fan

          Provided

          Minimum display unit

          0.1 µm 0.000004", 0.01°, 0.00001 mm2

          Language

          Switchable between Japanese, English, and Chinese (Simplified)

          Ratings

          Power voltage

          24 V DC ±10%

          Maximum current consumption

          3.3 A

          Environmental resistance

          Ambient temperature

          0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)

          Relative humidity

          35 to 85% RH (no condensation)

          Weight

          Approx. 2500 g

          *1 3D mode cannot be used with the LJ-X8000E.
          *2 For LJ-X8080 connection, when binning (Z) is ON, or when the measurement range (Z) is set to 1/2.
          *3 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

          Tips of Measurement

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors