Recent Searches
    Series ()
      Models ()
        Keywords

          High-speed optical micrometerLS-9000 series

          LS-9501

          Controller

          SPECIFICATIONS

          Select Language

          Model

          LS-9501*1

          Type

          Controller: NPN output type

          No. of connectable sensor heads

          2

          Head compatibility

          Yes

          Display

          Minimum display unit

          0.01 µm

          Display range

          ±99,999.99 µm to ±9,999.9 mm

          LED display

          POWER ON indicator, ERROR indicator

          Input terminal block

          Encoder input

          NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output

          Synchronous 1, 2 input

          Non-voltage input

          Auto-zero 1, 2 input

          Reset 1, 2 input

          Storage trigger input

          Storage enable input

          Storage data clear input

          Statistics 1, 2 input

          Statistics clear 1, 2 input

          Program selection input

          Non-voltage input x 4 inputs

          Output terminal

          Analog voltage output

          ±10 V x 2 outputs, output impedance 100 Ω

          Analog current output

          4 to 20 mA x 2 outputs, compatible load max. 350 Ω

          Universal output

          NPN open-collector output x 10 outputs
          Measured value and tolerance judgment output, status output allocatable

          Status 1, 2 output

          NPN open-collector output

          Total judgment output

          Memory FULL output

          Strobe 1, 2 output

          Error output

          NPN open-collector output (N.C.)

          Interface

          Ethernet

          1000BASE-T/100BASE-TX

          USB

          USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)

          RS-232C

          Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps

          Display and settings panel

          LS-D1000 Max. four heads connectable

          Rating

          Power voltage

          24 VDC ±10 %, including Ripple (P-P)

          Current consumption

          When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected
          When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected*2

          Environmental resistance

          Ambient temperature

          When LS-HA100 not used: 0 to +50 °C 32 to 122 °F
          When LS-HA100 in use: 0 to +45 °C 32 to 113 °F

          Relative humidity

          20 to 85 % RH (No condensation)

          Weight

          Approx. 1,500 g

          *1 NPN open-collector output rating: 50 mA max. (40 V max.), residual voltage of 1 V max.
          Non-voltage input rating: ON voltage of 1 V max., OFF current of 0.6 mA max.
          *2 Add the current consumption values for all units when connecting the display settings panel and expansion units.
          When the LS-9006D or LS-9030D is connected, it counts as two heads.

          Tips of Measurement

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors