Recent Searches
    Series ()
      Models ()
        Keywords

          Micro-head Spectral-interference Laser Displacement MeterSI-F series

          SI-F1001

          Controller

          SPECIFICATIONS

          Select Language

          Model

          SI-F1001*1

          Type

          Main Controller Separate type*2

          No. of connectable spectrum units

          2

          Display

          Minimum display unit

          0.001 µm

          Display range

          ±999.999 µm to ±9999.99 mm (7 settings selectable)

          Display cycle

          10 times/sec.

          Terminal block

          Laser remote interlock input

          Non-voltage input*3

          TIMING1 input

          RESET1 input

          Auto-zero1 input

          Laser control input

          Analog voltage output

          ±10 V x 2 outputs, Output impedance: 100 Ω*3

          Analog current output

          4 to 20 mA x 2 outputs, Maximum load resistance: 350 Ω*3

          Alarm output

          NPN open-collector output (N.C.)*3

          General comparator output

          NPN open-collector output*3

          Expansion connector

          TIMING2 input

          Non-voltage input*3

          RESET input

          Auto-zero input

          Program switch input

          Non-voltage input x 3 inputs*3

          Alarm output

          NPN open-collector output (N.C.)*3

          Comparator/ binary output

          Binary output

          Measured value data output (21 bits) OUT selectable NPN open-collector output*3

          Strobe output

          NPN open-collector output*3

          Binary selection output

          Binary selection input

          Non-voltage input*3

          RS-232C interface

          Measured data output and control input/output (Baud rate selectable to 115,200 bps max.)

          USB interface

          USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)

          Ethernet interface

          100Base-TX/10Base-T

          Major functions

          12 Out simultaneous measurement
          calculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory,
          interferometer mode, mask, connection of setting support software, etc.

          Rating

          Power voltage

          24 VDC ±10 %, Ripple (P-P) 10 % or less

          Current consumption

          One head connected: 0.6 A or less. Six heads connected: 1.5 A or less.

          Environmental resistance

          Ambient temperature

          0 to +50 °C 32 to 122 °F*4

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions

          Weight

          Approx. 600 g

          *1 The SI-F1003 can be used independently, The measured value display and setting change can be done with the display panel(SI-FD500) and setup support software(SI-H3).
          *2 The SI-F1001 can be used independently. The measured value display and setting change can be done with the display panel (SI-FD500) and setup support software (SI-H1).
          *3 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max.
          • Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max.
          • Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external
          devices. For details, refer to "Precautions on wiring".
          *4 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

          Tips of Measurement

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Measurement Sensors