Wide-field 3D Image Stitching & Measurement Function
Even when a target has an uneven surface, a fully-focused image can be obtained instantly by compiling images at different focal planes. After creating the composite image, the focal position data can then be used to construct a 3D model. When the Z-axis motorized stage is used, this 3D image can be displayed easily by just pushing a button on the console.
Color bars that indicate height are displayed on a 3D image. The highest position is displayed in red and the lowest position is displayed in blue, allowing you to see height differences clearly at a glance. The height data can be superimposed on a raw image. Furthermore, the X-axis, Y-axis and Z-axis scales are calculated automatically and displayed according to the image size and the 3D rotation angle.
The volume within the selected rectangle on the 3D image can be measured.
A selected cross-section of the 3D image can be displayed as a profile line.
A distance between two parallel planes in the 3D image can be measured.
A cross section angle of two chosen planes in the 3D image can be measured.
Measures the radius and angle of any area on the 3D image.