Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          Clamp-On Gas Flow MeterFD-G series

          FD-GU1

          AC power unit

          SPECIFICATIONS

          Select Language

          Model

          FD-GU1

          System

          Switching type

          Input supply voltage

          100 to 240 VAC; +10%/−15% (50/60 Hz)

          Output voltage

          24 VDC ±5%

          Overvoltage category

          ll

          Ripple noise

          260 mV (p-p) or lower

          Output capacity

          9.1 W (0.38 A) (Class 2)

          Power consumption

          100 VAC: 0.3 A or lower; 200 VAC: 0.2 A or lower

          Pollution degree

          2

          Withstand voltage

          3000 VAC, 1 minute (between input and output, between all external terminals and case)

          Momentary interruption

          20 ms or lower

          Wiring specifications

          AC input: power supply M4 terminal block, 2 poles; Analog output: M3 terminal block, 2 poles; DC output: M12 4-pin connector

          Protection circuit

          Protection against power supply surge, protection against output short-circuiting

          Main unit size

          63 2.48" × 240 9.45" × 40 1.57" mm

          Environmental resistance

          Enclosure rating

          IP65/67 (IEC60529)

          Ambient temperature

          -20 to +50ºC -4 to 122°F (no freezing)

          Relative humidity

          5 to 90%RH (no condensation)

          Vibration resistance

          10 to 500 Hz power spectral density: 0.816 G2/Hz in X, Y, Z axis directions

          Shock resistance

          Shock resistance 50 m/s2; 16 ms pulses, 1000 times each for X, Y, and Z axes

          Material

          PBT

          Weight

          Approx. 400 g

          • FlowKnowledge
          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Process Controls / Process Sensors