Recent Searches
    Series ( results)
      Models ( results)

          Heavy Duty Type Digital Pressure SensorsGP-M series


          Main Unit, Positive-pressure Type, 1 MPa


          Select Language



          Rated pressure

          -14.5 to +145.0 PSI
          (-0.1 to +1 MPa)

          Possible display range

          -30.5 to +161.0 PSI
          (-0.210 to +1.110 MPa)

          Zero-cut pressure value

          ±0.5% of F.S.

          Burst pressure

          2175 PSI (15 MPa)

          Display resolution










          Fluid type

          Gas or liquid that will not corrode the liquid contact part

          Type of pressure

          Gage pressure


          ±1.0% of F.S. or less*1


          ±0.3% of F.S. or less*2

          Temperature characteristics

          ±0.6% of F.S./10°C 50°F

          Connection port

          G3/4 (Changes to the R male 1/8, R male 1/4, R male 3/8, G female 1/4, NPT male 1/8, and NPT male 1/4 option adapters are available.)

          Box rotation angle

          Maximum 330°

          Medium temperature

          -20 to +100°C -4°F to +212°F (no freezing/condensation)*3

          Power voltage

          10-30 VDC, Ripple (P-P): 10% max, Class 2 or LPS

          Current consumption

          50 mA or less (when 24 V: 32 mA or less, when 12 V: 48 mA or less. Not including load)*4

          Display method

          4 column, digital LED, red/Vertical inversion display possible

          Operation display light

          Operation indicator (output 1) (orange), Operation indicator (output 2) (orange)


          During hysteresis mode: variable (Difference between switch-on point and switch-off point is hysteresis)
          During window mode: fixed (0.5% of F.S.)


          Control output

          Selectable from 3 to 5000 ms

          Analog output

          As above + 2 ms (90% response)


          Output 1 control output

          NPN/PNP open collector (Selectable), Max. 250 mA (30 V max)
          Main unit residual voltage 1 V max, N.O./N.C. selectable

          Output 2
          replacement type

          Control output

          Analog output

          4-20 mA, maximum load resistance 500 Ω (When the electric voltage is more than 20 V)*5

          Environmental resistance

          Enclosure rating


          Pressure resistance

          4 MPa (40 bar)

          Ambient temperature

          -20 to +80 °C -4 to 176 °F (No freezing and no condensation)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          IEC60068-2-6 20 G (10 to 2000 Hz, 2 hours each in the X, Y, and Z axis)

          Shock resistance

          IEC60068-2-27 50G (11 ms, 3 times for each of X, Y and Z direction)


          Wetted part

          Pressure port: SUSXM7, Diaphragm pressure port: Al2O3 (Alumina), O ring: FKM

          Other parts

          Housing metal portion: SUS304, SUS303, Housing plastic portion: PPSU, Air hole: PTFE, nickel-plated brass.

          Applicable cable

          M12 connector 4 pin


          Approx. 150 g

          *1 This is the value when considering linearity + hysteresis + repeatability in a stable environment of 23°C 73°F.
          *2 The repeatability, based on consistent conditions, is the variation in the value that will be displayed.
          *3 When the temperature of the piping exceeds 80°C 176°F, do not connect the cable.
          *4 Consumption current including output is 0.6 A and under.
          *5 The maximum load resistance R will be the values below in response to the electric voltage E. When 10-23V: R = {38 x (E-10) + 128} Ω When 23-30V: R = 622 Ω

          • Liquid Flow Meter Selection Site [Get Started]
          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Process Controls / Process Sensors