Digital Fiber Optic Sensor

FS-N40 series

Catalogs View Catalog

Fiber Unit Thrubeam type FU-96T

FU-96T - Fiber Unit Thrubeam type

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Software

Specifications

Model

FU-96T*1

Type

Thrubeam

Fibre unit length

2 m78.74" free-cut

Fibre unit diameter

ø2.2

Minimum bend radius

R25 mm0.984"*2

Minimum detectable object

Opaque material with a diameter of 0.2 mm0.008"*3

Tightening torque

0.2 Nm or less

Environmental resistance

Enclosure rating

IP67*4

Ambient temperature

0 to +60 °C 32 to 140 °F (No condensation and no freezing)*5

Relative humidity

35 to 85 % RH (No freezing and No condensation)*6

Material

Main unit case : PFA, fiber sheath : PFA*4

Accessories

Fiber cutter

Weight

Approx. 35 g

*1 For details on the detecting distance, see the fiber amplifier catalog.
*2 The section 25 mm in length from the screw cap tip of the main unit case cannot be bent.
*3 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.
*4 Using this product in high-temperature liquids or steam may lead to penetration of the fluorocarbon polymers, which may cause fluctuations in the received light intensity and damage to the internal components.
*5 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85%RH or less.
*6 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85 % RH or less.

Data Sheet (PDF) Other Models