Recent Searches
    Series ()
      Models ()
        Keywords

          Digital Fiber Optic SensorsFS-V20 series

          FS-V22R

          Fiber Amplifier, Cable Type, Expansion Unit, NPN

          SPECIFICATIONS

          Select Language

          Model

          FS-V22R

          Type

          1-line expansion unit, NPN

          Light source LED

          Red LED

          Response time

          250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED)

          Output selection

          Light-ON/Dark-ON selectable

          Indicator lamp

          Operation indicator: Red LED
          Dual digital monitor: Dual 7-segment display
          [Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 65,520; Excess gain: 0 P to 999 P]
          Hold function: Possible to display both peak and bottom hold values.
          Bar LED monitor: Possible to display together with Current Value
          Excess gain displayed (85 to 115 % in 7 steps)

          Detection mode

          Light intensity/rising edge/falling edge

          Shift function

          Max. ±1,999 (variable)

          Timer function

          Mode

          Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable

          Variable range

          1 to 500 ms
          [1 to 30 ms (in 1 ms increments), 30 to 50 ms (in 2 ms increments), 50 to 200 ms (in 10 ms increments), 200 to 500 ms (in 50 ms increments)]

          Accuracy

          ±10 % of the Preset Value

          Control output

          100 mA max. (40VDC max), Residual voltage: 1Vmax.

          Rating

          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Power consumption

          Normal

          S-APC OFF: 650 mW max.(27 mA max. at 24 VDC), S-APC ON: 720 mW max.(30 mA max. at 24 VDC)*1

          ECO half

          S-APC OFF: 530 mW max.(22 mA max. at 24 VDC), S-APC ON: 660 mW max.(25 mA max. at 24 VDC)*1

          ECO all

          S-APC OFF: 480 mW max.(20 mA max. at 24 VDC), S-APC ON: 550 mW max.(23 mA max. at 24 VDC)*1

          Environmental resistance

          Ambient light

          Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

          Ambient temperature

          -10 to +55 °C 14 to 131 °F (No freezing)*2

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material

          Polycarbonate

          Weight

          Approx. 45 g (including 2-m cable)

          *1 S-APC will be always turned ON when the high-resolution or high-speed mode is selected. S-APC is by default set to OFF in any other mode.
          *2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
          3 to 10 Units: –10 to +50 °C 14 to 122 °) 11 to 16 Units: –10 to +45 °C 14 to 113 °F

          Fiber Unit Finder

          • Fiber Unit Finder
          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors