Manual-Calibration Fiberoptic SensorFS-V/T/M series (FS01)


Fiber Amplifier, Cable Type, Main Unit, NPN


Select Language



Light source


Sensitivity adjustment/Mode selection

8-turn trimmer (with indicator),
FINE/TURBO (switch-selectable)

Response time

20 µs (FINE) /50 µs (TURBO)

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: Red LED
Stable operation: Green LED

Timer function

ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

Control output

NPN open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max.

Stability output

NPN open-collector: 50 mA max. (40 VDC max.), Residual voltage:1 V max.

Protection circuit

Reversed polarity protection, over-current protection, surge absorber


Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

35 mA or less

Environmental resistance

Ambient light

Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.

Ambient temperature

-10 to +55 °C 14 to 131 °F (No freezing)*1

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material



Approx. 75 g

*1 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected.
When 3 to 10 units: -10 to +50 °C 14 to 122 °F
When 11 to 16 units: -10 to +45 °C 14 to 113 °F
When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe