Recent Searches
    Series ( results)
      Models ( results)

          Manual-Calibration Fiberoptic SensorFS-V/T/M series (FS01)


          Terminal Block Unit

          [Discontinued model]

          This model has been discontinued.

          To contact us:


          Select Language



          Response time

          350 µs to 1 ms *1

          Indicator lamp

          Red LED

          Timer function

          Number of inputs


          Input signal

          NPN/PNP non-voltage input (contact,solid-state) switching

          Output mode

          N.O./N.C. (selectable)


          Power voltage

          12 to 24 VDC ±5 %, Ripple (P-P) 5 % or less*2

          Current consumption

          50 mA or less, plus current consumed by connected sensor (100 mA or less)

          Environmental resistance

          Ambient temperature

          -10 to +50 °C 14 to 122 °F (No freezing)*3

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material



          Approx. 30 g

          *1 The response speed varies depending on the number of expansion units connected.
          *2 Change the supply voltage to meet the requirement of the input device (PLC, etc.).
          *3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
          1 to 5 Units: -10 to +50 °C 14 to 122 °F, 6 to 8 Units: -10 to +45 °C 14 to 113 °F.

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe