Manual-Calibration Fiberoptic SensorFS-V/T/M series (FS01)

FU-96T

Transmissive Fiber Unit

SPECIFICATIONS

Select Language

Model

FU-96T

Type

Thrubeam

Fibre unit length

2 m78.74" free-cut

Fibre unit diameter

ø2.2

Minimum bend radius

R25 mm0.984"*1

Detection distance

MEGA/FINE

MEGA

3600 mm141.732"

FINE

Other power modes

ULTRA

SUPER

TURBO

HSP

2400 mm94.488"

Minimum detectable object

Opaque material with a diameter of 0.2 mm0.008"*2

Tightening torque

0.2 Nm or less

Environmental resistance

Enclosure rating

IP67*3

Ambient temperature

0 to +60 °C 32 to 140 °F (No condensation and no freezing)*4

Relative humidity

35 to 85 % RH (No freezing and No condensation)*5

Material

Main unit case : PFA, fiber sheath : PFA*3

Accessories

Fiber cutter

Weight

Approx. 35 g

*1 The section 25 mm in length from the screw cap tip of the main unit case cannot be bent.
*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.
*3 Using this product in high-temperature liquids or steam may lead to penetration of the fluorocarbon polymers, which may cause fluctuations in the received light intensity and damage to the internal components.
*4 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85%RH or less.
*5 Use this product under the condition that if the ambient temperature exceeds 60 °C 140 °F, the absolute humidity is 60 °C 140 °F 85 % RH or less.

  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors