Recent Searches
    Series ( results)
      Models ( results)

          Expandable Area SensorPJ series



          [Discontinued model]

          This model has been discontinued.

          Recommended Replaceable Products
          To contact us:


          Select Language




          Base controller

          Combination sensor head

          PJ-V20, PJ-V21, PJ-V22, PJ-V40, PJ-V41, PJ-V42

          Response time

          FSD1, 2/SSD

          15 ms maximum, ON to OFF (including the sensor head response time)

          Safety category

          Category 4 according to EN954-1
          ESPE (type 4 AOPD according to IEC 61496)

          External input

          Input method

          Non-voltage or voltage input*1.



          Mechanical life : 10,000,000 times or more, electrical life : 100,000 times or more (When you are using an inductive load, we recommend that you use a surge protector.)

          FSD1 , 2/SSD

          230 VAC, 4 A; 30 VDC, 2 A (resistive load); 230 VAC, 4 A (cosØ = 0.3; inductive load); 30 VDC, 1 A (cosØ = 0.3; inductive load)


          115 VAC, 0.5 A; 30 VDC, 2 A (resistive load); 115 VAC, 0.25 A (cosØ = 0.3; inductive load); 30 VDC, 1 A (cosØ = 0.3; inductive load)

          Protection circuit

          Power supply part : reversed polarity protection, surge absorber

          Approved standards

          This product can be used in America, Canada, and all countries in Europe (see the manual).


          Power voltage

          24 VDC ±10 %, Ripple (P-P) 5 % or less

          Power consumption

          20 W maximum (including the sensor head)

          Current consumption

          PJ-V90 + V20: 350 mA, PJ-V91 + V20: 110 mA, PJ-V21: 25 mA, PJ-V22: 15 mA
          PJ-V90 + V40: 340 mA, PJ-V91 + V40: 110 mA, PJ-V41: 21 mA, PJ-V42: 19 mA

          Environmental resistance

          Enclosure rating

          IP20 (install the product in a panel with a rating of IP54 or higher)

          Ambient temperature

          -10 to +55 °C 14 to 131 °F (No freezing)

          Relative humidity

          35 to 95 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 times in each of the X, Y, and Z directions

          Shock resistance

          100 m/s2, 16 ms pulse, 1,000 times in each of the X, Y, and Z directions




          Approx. 520 g

          *1 (NPN model) The rating of non-voltage input : 1 V or less ON voltage, 0.6 mA or less OFF current. (PNP model) The rating of voltage input : 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFF

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe