Recent Searches
    Series ()
      Models ()
        Keywords

          Heavy-duty Photoelectric SensorsPX series

          PX-10C

          Amplifier Unit, Connector Type, NPN

          SPECIFICATIONS

          Select Language

          Model

          PX-10C

          Type

          Connector type

          Output

          NPN

          Response time

          500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)

          Output selection

          LIGHT-ON/DARK-ON

          Indicator lamp

          - Operation indicator:Red LED x 2, DSC orange LED x 1
          - Dual digital monitor:Dual 7-segment display
          [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together,
          current value range:0 to 65504, excess gain:0 P to 999 P]
          - Hold function:Possible to display both peak and bottom hold values. Selectable from 5 variations.
          - Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)]
          - Scaling display

          Detection mode

          Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]

          Shift function

          Variable between –1999 and 9999

          Timer function

          Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot
          Timer duration selectable:1 ms to 9999 ms
          Maximum error against the setting value:10% max.

          Control output

          NPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.

          External input

          Interference prevention

          Up to 4 units (in all power modes)*1

          Rating

          Power voltage

          12 to 24 VDC, Ripple (P-P) 10 % or less, Class2*2

          Power consumption

          Standard mode:50 mA max. at 24 V/55 mA max. at 12 V
          Power saving mode:40 mA max. at 24 V/45 mA max. at 12 V

          Environmental resistance

          Enclosure rating

          IEC: IP67/JEM: IP67/NEMA: 4X

          Ambient temperature

          -10 to +55 °C 14 to 131 °F (No freezing)*3

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

          Case material

          Housing:PBT, display:PSU, display cover/connector cover:SUS304, radiator plate:SUS304, gasket:NBR

          Weight

          Approx. 50 g

          *1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected
          somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts.
          *2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72).
          *3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below.
          2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors