Multi-Purpose CCD Laser MicrometerGV-T series

DL-RB1A

BCD Output Unit

SPECIFICATIONS

Select Language

Model

DL-RB1A*1

Synchronization between the transmitter and receiver

Transmission code

Baud rate

Indicator

Alarm indicator lamp (red), Power indicator lamp (green)

Sensor
connection
specifications

Number of
connectable
sensor units

Up to 15 units (including main unit)

BCD output specifications

I/O terminal

34-pin connector (MIL standard)

Control output

BCD output: 4 outputs (1 digit) × 6 digits, signed output, strobe output, alarm output, NPN open-collector output: 40 V, 20 mA or less, residual voltage: 1 V or less, positive logic/negative logic (switchable)

Control input

ID selection input: 4 inputs, data request input, no-voltage input (with contacts, without contacts); input time: 2 ms or more; short-circuit current: 1 mA

Power voltage

20 to 30 VDC, including ripple, Ripple (P-P): 10% max. Class 2 (Supplied via connected sensor amplifier)

Power consumption

27 mA max.

Environmental resistance

Ambient temperature

-10 to +55 °C 14 to 131 °F

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Materials

Case/Polycarbonate

Weight

Approx. 46 g

Communication method

*1 For connecting with sensor, please refer to the user's Manual

  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • General Catalog Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors