Recent Searches
    Series ( results)
      Models ( results)

          Laser Thrubeam SensorIB series


          Amplifier Unit, DIN Rail Type


          Select Language




          DIN rail mount

          Main unit/Expansion unit

          Main unit

          Head compatibility



          Display resolution

          0.01 %, 0.1 %, 1 % (switchable)

          Display range

          –99.999 to 99.999, –99.99 to 99.99, –99.9 to 99.9, –99 to 99 (switchable)

          Digital display method

          Dual 7-segment display, Upper level: 5 red digits, Lower level: 5 green digits

          Operating indicators

          Judgment indicator: 2-color (green/red) LED (HI, GO, LO), Bank indicator: Green LED x 4,
          Laser emission warning indicator: Green LED, Others: Green LED x 8, red LED x 3

          Analog output voltage

          ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100Ω*1

          Analog current output

          4 to 20 mA Maximum load resistance 350 Ω*1

          Control Input

          Bank switch input, zero shift input

          Non-voltage input*2

          Control input

          Zero shift input

          Laser emission stop input

          Timing input

          Reset input

          Adjust input

          Control output

          Judgment output (check output)

          Open collector (NPN/PNP switchable, N.O./N.C. switchable)*3

          Power supply

          Power consumption

          1,950 mW or less (at 30 V, 65 mA max.)*4


          Power voltage

          10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS

          Environmental resistance

          Pollution degree


          Ambient temperature

          -10 to +50 °C 14 to 122 °F (No condensation or freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis


          Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC


          Approx. 150 g

          *1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected.
          *2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less
          Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less
          *3 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less
          Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less
          *4 The power consumption with slave units installed is the total of each amplifier unit's power consumption.
          Example: When using one master unit (IB-1000) with two slave units (IB-1,050) (1,950 mW X 1) + (1,950 mW X 2) = 5,850 mW

          Sensor Library

          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe