CMOS Multi-Function Analog Laser Sensor

IL series

Catalogs View Catalog

Amplifier unit, Panel mount type IL-1500

IL-1500 - Amplifier unit, Panel mount type

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Software

  • CE Marking
  • CSA

Specifications

Model

IL-1500

Type

Panel mount

Main unit/Expansion unit

Main unit

Head compatibility

Compatible

Display

Minimum
displayable unit

IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm

Display range

IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable),
IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable),
IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable)

Display rate

Approx. 10 times/sec.

Analog voltage output

±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω*1

Analog current output

4 to 20 mA Maximum load resistance of 350 Ω*1

Control input

Bank switch input

Non-voltage input*2

Zero-shift input

Stop emission input

Timing input

Reset input

Control output

Judgement output

Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*3

Alarm output

Open collector output (NPN, PNP changeover possible/N.C.)*3

Current

Power voltage

10 to 30 VDC ripple (P-P) 10% included, Class 2*4

Power consumption

2500 mW or less (at 30 V: 84 mA or less)

Environmental resistance

Pollution degree

2

Ambient temperature

-10 to +50 °C 14 to 122 °F (No condensation or freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Material

Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC

Weight

Approx. 170 g (including attachments)

*1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA.
*2 Assign an input of your choice to the 4 external input lines before using.
*3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit)
The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit)
*4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.

Data Sheet (PDF) Other Models