Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          Pattern Matching SensorAI series

          AI-1000

          Separate Amplifier Model: Amplifier, Cable Type, for AI-H

          SPECIFICATIONS

          Select Language

          Model

          AI-1000

          Connection Type

          6-core cable

          Detection Modes

          Presence check mode / Difference check mode / Feeder mode

          Response Time

          Switchable between 3 ms/10 ms/20 ms/50 ms/100 ms

          Timer

          OFF/Off-delay/On-delay/One-shot

          Bank Function

          Bank slots: Up to 4

          Other Functions

          Filter, orientation detection, anti-blur, hysteresis, mutual interference prevention, indicator LED color change,
          screen display orientation, statistics display, failure hold display, key lock function, I/O test

          Display Panel

          Organic LED (OLED) display

          Languages

          Japanese/English/Chinese (Simplified)

          Indicators

          Main Indicator

          1 (green/red/orange)

          I/O Indicators

          4 indicators (red): OUT1/OUT2/IN1/IN2

          Input

          Type

          Non-voltage input/voltage input can be switched
          Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit)
          Voltage input: Maximum input rating 30 V, ON current 18 V or higher, OFF current 0.1 mA or lower, ON current 2 mA or lower (at 30 V)

          Number of Inputs

          2: IN1/IN2

          Functions

          Assignable functions: Bank/Hold (level)/Hold (edge)/Reset/External calibration/Interference prevention/Light off

          Output

          Type

          Open collector output: Can be switched between NPN/PNP and N.O./N.C.
          Maximum rating: 30 V 50 mA, remaining voltage 2 V or lower

          Number of Inputs

          2: OUT1/OUT2

          Functions

          Assignable functions for OUT2: Error output/Judgment output 2/Interference prevention output (sync-output)

          Communication Functions

          IO-Link: Specification v. 1.1 (1.0)/COM2 (38.4 kbps)

          Rating

          Power voltage

          20 to 30 VDC, including Ripple (P-P) 10 %

          Current consumption

          0.35 A or less (power voltage at 20 V, excluding the output load)

          Environmental resistance

          Ambient temperature

          -10 to +50 °C 14 to 122 °F (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

          Materials

          Main unit case/Dust cover: Polycarbonate; Button: POM; Display panel: Acrylic

          Weight

          Approx. 110 g (including the cable of 2 m 78.74")

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • General Catalog Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors