Heavy Duty Type Digital Pressure Sensors

GP-M series

Catalogs View Catalog

Main Unit, Built-in temperature sensor Positive-pressure Type, 25 MPa GP-M250T

GP-M250T - Main Unit, Built-in temperature sensor Positive-pressure Type, 25 MPa

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Software

  • CE Marking
  • CSA

Specifications

Model

GP-M250T

Rated pressure

0 to +3626 PSI
(0 to +25 MPa)

Possible display range

–362.6 to +3988.5 PSI
(–2.50 to +27.50 MPa)

Allowable pressure

7252 PSI (50 MPa)

Zero-cut pressure value

±0.5% of F.S.

Burst pressure

14504 PSI (100 MPa)

Display resolution

1.5 PSI (0.01 MPa)

Fluid type

Liquid that will not corrode the fluid contact part

Type of pressure

Gauge pressure

Precision

±1.0% of F.S. or less*1

Repeatability

±0.3% of F.S. or less*2

Temperature characteristics

±0.6% of F.S. / 10°C 50°F

Connection port

G3/4 (Changes to R1/8 male, R1/4 male, R3/8 male, G1/4 female, NPT1/8 male, and NPT1/4 male with available adapters.)

Box rotation angle

Maximum 330°

Medium temperature

–20 to +100°C –4 to +212°F (no freezing/condensation)*3*4

Power voltage

10 to 30 VDC, Ripple (P-P): 10% max., Class 2 or LPS

Current consumption

60 mA or less (when 24 V: 30 mA or less; when 12 V: 50 mA or less. Excluding output)*5

Possible display range (temperature)

–32 to +112°C –25.6 to +233.6°F

Display method

4 column digital LED white/Vertical inversion of display is possible

Display resolution (temperature)

0.1°C 32.18°F

Liquid contact temperature measurement accuracy

±3.5°C ±6.3°F (at an ambient temperature of 25°C 77°F)*6

Display method

Status indicator (orange, green, red, blue), output indicator 1 (orange), output indicator 2 (orange), temperature indicator (white), communication indicator (green)

Pressure hysteresis

During hysteresis mode: variable (Hysteresis is the difference between the upper setting value and the lower setting value)
During window mode: fixed (0.5% of F.S.)

Pressure responsiveness

Control output

Selectable from 3 to 5000 ms

Analog output

As above +2 ms (90% response)

Output

Output 1 control output

NPN/PNP open collector (Selectable) 30 V or less,
Output 2 Max. 100 mA Residual voltage for the Main Unit is 1 V or less, N.O./N.C. selectable

Output 2
replacement type

Control output

Analog output

Pressure analog output/temperature analog output (selectable), 4–20 mA; maximum load resistance 260 Ω

Network compatibility

IO-Link*7

Environmental resistance

Enclosure rating

IP67

Ambient temperature

–20 to +80°C –4 to +176°F (no freezing or condensation)*8

Relative humidity

35 to 85% RH (no condensation)*8

Vibration resistance

IEC60068-2-6 20 G (10 to 2000 Hz In each direction of X, Y, Z for 2 hours)

Shock resistance

IEC60068-2-27 50 G (11 ms In each direction X, Y, Z 3 times)

Material
properties

Wetted part

Pressure port: SUSXM7/Diaphragm pressure port: Al2O3/O-Ring: FKM

Other parts

Housing metal portion: SUS304, SUS303; Housing plastic portion: PPSU; Air hole*9: PTFE, nickel-plated brass.

Applicable cable

M12 connector 4 pin

Weight

Approx. 150 g 5.29 oz

*1 This is the value when considering linearity + hysteresis + repeatability in a stable environment of 23°C 73.4°F.
*2 The repeatability, based on consistent conditions, is the difference in the detection points at the time of fluctuations in the repetition.
*3 When the temperature of the piping exceeds 80°C 176°F, do not connect the cable.
*4 Condensation may cause measurement failure or breakage. To prevent condensation, take the following measures:
• Make sure the ambient temperature is the same or lower than the fluid temperature.
• Use A/C for dehumidification.
• Keep the sensor 30 cm 11.81" or more from the cooling pipe using connective piping.
*5 Consumption current including output is 0.3 A and under.
*6 This is the value when the measured fluid is water and a KEYENCE adapter is used.
*7 IO-Link specification v1.1/COM2 (38.4 kbps) is supported.
*8 See "7" in "Other precautions" on P.13 for measures on preventing condensation.
*9 Only GP-M001T/M010T/M025T

Data Sheet (PDF) Other Models