This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Main controller Standard type - GC-1000

Expansion Unit SC-T01

SC-T01 - Expansion Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

  • CE Marking
  • UL Listing(c/us)

Specifications

Model

SC-T01

Response time

60 ms (safety output ON to OFF, IEC/EN60204-1 stop category 0), 120 ms (safety output OFF to ON) (including when the 0 second has been selected for the SC-T01 off display timer)

Response time when using OFF-delay timer

Off delay timer: 0.2, 0.4, 0.6, 0.8, 1, 2, 5, 10, 15 seconds (selectable; safety output ON to OFF, IEC/EN60204-1 stop category 1), timer error: -0%, +10%

Safety output (S-OUTPUT)

Output

Two PNP outputs

Output voltage

Depends on the power supply voltage (26.4 VDC maximum)

Max. load current

500 mA

Residual voltage (when ON)

2.5 V maximum (with a load current of 500 mA)

Leakage current

1 mA maximum

Max. capacitive load

2.2 µF (with a load resistance of 100 Ω)

Load wiring length

30 m maximum

Safety input (S-INPUT, enable input)

Input type

Contact output device connection or PNP output device connection

Short-circuit current

Approx 5mA

ON/OFF voltage

Voltage when product turned on: 19 V or more, voltage when product turned off: 5 V or less (when a contact device connection is made to the 2-channel side input: voltage when product turned on: 5 V or less, voltage when product turned off: 19 V or more)

Wiring length

30 m maximum

Safety related input

Input type

No-voltage contact input (EDM input, master reset input, group reset input)

Short-circuit current

EDM input: Approx. 10 mA, reset input: Approx. 5 mA (EDM input, master reset input, group reset input)

Wiring length

30 m maximum (EDM input, master reset input, group reset input)

Non-safety output

Output

PNP/NPN totem pole output (Notification output 1 to 4, AUX output, interlock-reset-ready output, lockout output)

Output voltage

Depends on the power supply voltage (26.4 VDC maximum) (Notification output 1 to 4, AUX output, interlock-reset-ready output, lockout output)

Max. load current

50mA (Notification output 1 to 4, AUX output, interlock-reset-ready output, lockout output)

Residual voltage

2.5 V maximum (with a load current of 50 mA) (Notification output 1 to 4, AUX output, interlock-reset-ready output, lockout output)

Leakage current

1 mA maximum (Notification output 1 to 4, AUX output, interlock-reset-ready output, lockout output)

Load wiring length

10 m maximum (Notification output 1 to 4, AUX output, interlock-reset-ready output, lockout output)

Non-safety input

Input type

No-voltage contact input or PNP or NPN open-collector input (external off input, teach mode input, teach preparation completion input)

Short-circuit current

Approx 5mA (external off input, teach mode input, teach preparation completion input)

ON/OFF voltage

Voltage when product turned on: 5 V or less or 19 V or more, voltage when product turned off: open or 9 V to 15 V (external off input, teach mode input, teach preparation completion input)

Wiring length

10 m maximum (external off input, teach mode input, teach preparation completion input)

Protection circuit

Power supply reverse polarity protection, overcurrent protection for each output, short-circuit protection , surge protection

Approved standards

EMC

EMS

IEC/EN/UL 61496-1, IEC62061

EMI

EN55011 ClassA, FCC Part15 ClassA, ICES-003 Issue4 ClassA

Safety

ISO13849-1:2015 (Cat.4, PL e), IEC/EN61496-1,EN50178,UL1998,UL508

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less, Class 2, output hold time: 20 ms or more

Current consumption

1.2 A per unit

Environmental resistance

Enclosure rating

IP20 (IEC60529)
Installed in a control panel that has a rating of IP54 or higher

Pollution degree

2 (IEC60664/EN50178)

Overvoltage category

2 (IEC60664, EN50178)

Insulation resistance

100 MΩ or more (tested with a 500 VDC megger) between the internal circuit and the external case

Operating ambient temperature

-10 to +55 °C 14 to 131 °F (No freezing)

Storage temperature

-20 to +65 °C -4 to 149 °F (No freezing)

Operating relative humidity

35 to 85 % RH (No condensation)

Storage relative humidity

35 to 85 % RH

Altitude

2,000 m or less

Withstand voltage

1,500 VAC, 50/60 Hz for 1 minute between the internal circuit and the external case

Vibration resistance

10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions

Shock resistance

100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions

Material

Main unit case

Polycarbonate (UL94-V2)

Weight

170 g or less

Data Sheet (PDF) Other Models