Flexible inspection tools
The XG VisionEditor is a specialized PC software that can conduct everything from the construction of vision inspection programming and creation of custom user interfaces, to debugging and simulation, all at once. VisionEditor does not use programming language. Instead, all operations are conducted in an easy to understand GUI environment. Here, drag-and-drop dominates, enabling complex processing to be easily developed in minimal time. Due to the incorporation of debugging tools that simultaneously discover errors (both static and dynamic) that occur during development, man-hours dedicated to debugging have been dramatically reduced. All in all, the overall time between construction and deployment have been substantially reduced. By focusing on the optimization of the tools required for providing a solution (the core of image processing inspections) KEYENCE has given the opportunity for significant improvements in machine vision development efficiency.
Debugging is easy as errors are highlighted and the usage of
variables can be easily seen.
By dragging-and-dropping processing units from the parts list into this section, you can easily construct an image processing flowchart.
Shows the resources used in different areas of the controller from the settings made.
Lists everything all the way from inspection tools such as edge detection and pattern matching, to control processing such as condition branching timers and loops. By dragging-and-dropping items from this list to the flowchart, the image processing flowchart can be easily constructed.
Simulations can be run from images taken from a connected controller, held on a PC or across a network. Options for continuous program operation, step by step or a single iteration are possible too.
In addition to displaying captured images and setting up GUI, you can confirm in real-time the processing results of filters or inspections tools
All aspects of result and measurement data from units and variables can be viewed here. The unit results section is also equipped with a watch view allowing the display of only the variables or measurement values you wish to see, helping allow for easy confirmation and analysis of results. In the unit results you can also conduct editing of the variables making dialing in and changes very easy.
A unique display screen configured to your needs and desires can be easily created by dragging, dropping and resizing different components from the parts list. By being able to use and configure many components such as BMP images, graphics, text, measurement value and camera images the screen can be designed with the operator in mind. Up to 100 different screens can be created per program for full customization to any process. Screens and components can be easily displayed and switched between, not only via external inputs, but also based on image processing results or settings.
The inclusion of 1D & 2D code reading tools enable the XG Series to not only read codes but also perform vision based inspections on targets. By removing the need for both conventional 1D & 2D code readers and a camera for image processing, space, time and money can all be saved with the use of this tool.
Filtering of defects down to long thin cracks only using area and axis ratio.
Improves problems where measurement results differ at the center and edge of the screen due to the occurrence of lens distortion.
Automatic inspection region adjustment on complex shapes based on their binary image. Enabling stable detection on any target even without position adjustment.