Ethernet Switch
NE series
Specs Ethernet Switch NE series
|
Model |
NE-Q05 |
NE-Q05P |
|||
|
Image |
|
|
|||
|
General specifications |
Current consumption. |
180 mA |
2.2 A |
||
|
Power voltage |
24 VDC ± 10% |
||||
|
Operating ambient temperature |
0 to +50°C 32 to 122°F *1 (no freezing) |
||||
|
Operating ambient humidity |
10 to 95%RH (no condensation) |
||||
|
Storage ambient temperature |
-20 to +70°C -4 to 158°F |
||||
|
Operating environment |
Minimal amount of dust and corrosive gas present |
||||
|
Operating altitude |
2000m or less |
||||
|
Noise immunity |
1,500 Vp-p, pulse width: 1 µs, 50 ns (by way of a noise simulator) |
||||
|
Withstand voltage |
1,500 VAC for 1 minute between the power supply terminal and the communication terminal and between all the external terminals and the case |
||||
|
Insulation resistance |
50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the communication terminal and between all the external terminals and the case) |
||||
|
Shock resistance |
Acceleration: 150 m/s2, operating time: 11 ms, 2 times in each of the X, Y, and Z directions |
||||
|
Overvoltage category |
I |
||||
|
Pollution degree |
2 |
||||
|
Vibration resistance |
Intermittent vibration |
Frequency: 10 to 57 Hz |
Amplitude: 0.075 mm*2 |
||
|
Frequency: 57 to 150 Hz |
Acceleration: 9.8 m/s2*2 |
||||
|
Continuous vibration |
Frequency: 10 to 57 Hz |
Amplitude: 0.035 mm*2 |
|||
|
Frequency: 57 to 150 Hz |
Acceleration: 4.9 m/s2*2 |
||||
|
Weight |
Approx 180g |
Approx 260g |
|||
|
Function/performance specifications |
Data transfer speed |
10 Mbps, 100 Mbps, automatic support for full duplex and half duplex modes |
|||
|
MDI/MDI-X automatic switching function |
Provided |
||||
|
Auto-negotiation function |
|||||
|
Communicationspecifications |
MAC address retention |
300 s |
|||
|
Function/performance specifications |
Upper limit for the number of MAC addresses that can be registered |
2048 |
|||
|
QoS function |
Priority control of EtherNet/IP™ cyclic data |
||||
|
PoE function |
None |
2 ports, conforms to IEEE802.3af, supply power: 15.4 W/port (44 to 57 VDC) |
|||
|
Communicationspecifications |
Switching type |
Store and forward method |
|||
|
Metal cable |
Flow control |
Half duplex: back pressure, full duplex: conforms to IEEE802.3x; pose packets are used to perform flow control |
|||
|
*1 This is regulated according to the temperature below the control panel unit. |
|||||
