Specs Network Compatible Pressure Sensor AP-N series

Sensor heads (Detection components)

Model		AP-41M	AP-41	AP-43	AP-44	AP-48
Image
Application		Gauge pressure				Differential pressure
Type		Negative pressure		Positive pressure	Compound pressure
Rated pressure		0 to -101.3 kPa		0 to 1 Mpa	+101.3 to -101.3 kPa	-101.3 to +101.3 kPa
Fluid type		Air, non-corrosive gasses
Temperature characteristics		±2 % of F.S. (When the temperature varies from 25 °C 77 °F)
Pressure port		M3 male threaded	M5 male threaded			R1/8
Environmental resistance	Pressure resistance	500 kPa		1.5 MPa	500 kPa
	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 4 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 10 times in each of X, Y and Z directions, total of 60 times
Material		Case: PBT, Screw: SUS303, Cable: PVC
Weight		Approx. 68 g (including cable)	Approx. 70 g (including cable)			Approx. 98 g (including cable)

Sensor amplifiers (Display devices)

Model		AP-N10	AP-N10D
Image
Type		Single output type	Dual output type
Applicable sensor head		AP-41M, AP-41, AP-43, AP-44, AP-48
Configuration/Display range		-15 to +110 % of F.S.
Repeatability		±0.2 % of F.S.
Display resolution		AP-41M/41/44/48: Standard mode 0.1 kPa, High resolution mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High resolution mode 0.1 kPa
Power consumption	Normal	770 mW or less (at 24 V, 32 mA or less/at 12 V, 54 mA or less)
	Eco mode	560 mW or less (at 24 V, 23 mA or less/at 12 V, 37 mA or less)
Expansion units		Max. 16 units (Dual output type is counted as 2 units.)^*1
Control output(s)		1^*2	2^*2
Display temperature characteristic		±1 % of F.S. (When the temperature varies from 25 °C 77 °F)
Response time (Chattering prevention function)		1 ms/2.5 ms/5 ms/100 ms/500 ms/1,000 ms/5,000 ms selectable
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % max. Class2
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F (No freezing)^*3
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Material		Main unit and cover: Polycarbonate
Weight		Approx. 20 g
^1 Can connect to other N-bus sensor amplifiers. N-bus represents the wire-saving system for KEYENCE-manufactured sensor amplifiers. ^2 Number of outputs when connected to the communication unit NU Series. There are no control output wires. ^*3 11 to 16 units connected: 0 to +45 °C 32 to 113 °F (When the sensor amplifier is installed on DIN rail on a metal plate)