Specs : Inductive Proximity Sensor - ER series

Built-in amplifier Ultra-long distance shielded type M8/M12 PNP output

Model		ER-08P	ER-08PC	ER-08TPC ^8 ^9	ER-08P03C	ER-12P	ER-12PC	ER-12TPC ^8 ^9	ER-12P03C
Image
Type		Ultra-long distance shielded type Screw type M8 Cable PNP output	Ultra-long distance shielded type Screw type M8 Connector (M8 3-pin) PNP output		Ultra-long distance shielded type Screw type M8 Connector with pigtail (M12 4-pin) PNP output	Ultra-long distance shielded type Screw type M12 Cable PNP output	Ultra-long distance shielded type Screw type M12 Connector (M12 4-pin) PNP output		Ultra-long distance shielded type Screw type M12 Connector with pigtail (M12 4-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1		0.3 m 1.0' ^*1	2 m 6.6' ^*1	― ^*1		0.3 m 1.0' ^*1
No. of control outputs		1			2	1	2
Output mode	Output 1	N.O.
	Output 2	―			N.C.	―	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	4.5 mm 0.18" ±10% ^*2				10 mm 0.39" ±10% ^*2
	With distance switching (Mode 2)	3 mm 0.12" ±10% ^*2				6 mm 0.24" ±10% ^*2
Response frequency	With default settings (Mode 1)	20 Hz ^3 ^4				30 Hz ^3 ^4
	With distance switching (Mode 2)	80 Hz ^3 ^4				100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		13.5 × 13.5 mm 0.53" × 0.53"				30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)		750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*10	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)		1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V) ^*10	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions				1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, button: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz		Approx. 40 g 1.41 oz	Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz		Approx. 50 g 1.77 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 Long-body type. See “Dimensions” for details. ^10 For IO-Link-compatible devices listed under *1, power consumption is as follows. M8: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier Ultra-long distance shielded type M18/M30 PNP output

Model		ER-18P	ER-18PC ^*8	ER-18P03C	ER-30P	ER-30PC ^*8	ER-30P03C
Image
Type		Ultra-long distance shielded type Screw type M18 Cable PNP output	Ultra-long distance shielded type Screw type M18 Connector (M12 4-pin) PNP output	Ultra-long distance shielded type Screw type M18 Connector with pigtail (M12 4-pin) PNP output	Ultra-long distance shielded type Screw type M30 Cable PNP output	Ultra-long distance shielded type Screw type M18 Connector (M12 4-pin) PNP output	Ultra-long distance shielded type Screw type M30 Connector with pigtail (M12 4-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1
No. of control outputs		1	2		1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.		―	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	15 mm 0.59" ±10% ^*2			26 mm 1.02" ±10% ^*2
	With distance switching (Mode 2)	10 mm 0.39" ±10% ^*2			20 mm 0.79" ±10% ^*2
Response frequency	With default settings (Mode 1)	20 Hz ^3 ^4			15 Hz ^3 ^4
	With distance switching (Mode 2)	50 Hz ^3 ^4			30 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		45 × 45 mm 1.77" × 1.77"			78 × 78 mm 3.07" × 3.07"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)		PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, button: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 110 g 3.88 oz	Approx. 65 g 2.29 oz	Approx. 85 g 3.00 oz	Approx. 175 g 6.18 oz	Approx. 140 g 4.94 oz	Approx. 150 g 5.30 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier Ultra-long distance shielded type NPN output

Model		ER-08N	ER-08N03C	ER-12N	ER-12N03C	ER-18N	ER-18N03C	ER-30N	ER-30N03C
Image
Type		Ultra-long distance shielded type Screw type M8 Cable NPN output	Ultra-long distance shielded type Screw type M8 Connector with pigtail (M12 4-pin) NPN output	Ultra-long distance shielded type Screw type M12 Cable NPN output	Ultra-long distance shielded type Screw type M12 Connector with pigtail (M12 4-pin) NPN output	Ultra-long distance shielded type Screw type M18 Cable NPN output	Ultra-long distance shielded type Screw type M18 Connector with pigtail (M12 4-pin) NPN output	Ultra-long distance shielded type Screw type M30 Cable NPN output	Ultra-long distance shielded type Screw type M30 Connector with pigtail (M12 4-pin) NPN output
Power supply cable length		2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1
No. of control outputs		1	2	1	2	1	2	1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.	―	N.C.	―	N.C.	―	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	4.5 mm 0.18" ±10% ^*2		10 mm 0.39" ±10% ^*2		15 mm 0.59" ±10% ^*2		26 mm 1.02" ±10% ^*2
	With distance switching (Mode 2)	3 mm 0.12" ±10% ^*2		6 mm 0.24" ±10% ^*2		10 mm 0.39" ±10% ^*2		20 mm 0.79" ±10% ^*2
Response frequency	With default settings (Mode 1)	20 Hz ^3 ^4		30 Hz ^3 ^4		20 Hz ^3 ^4		15 Hz ^3 ^4
	With distance switching (Mode 2)	80 Hz ^3 ^4		100 Hz ^3 ^4		50 Hz ^3 ^4		30 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		13.5 × 13.5 mm 0.53" × 0.53"		30 × 30 mm 1.18" × 1.18"		45 × 45 mm 1.77" × 1.77"		78 × 78 mm 3.07" × 3.07"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs				Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6				NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)		1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)		NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, button: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 40 g 1.41 oz	Approx. 75 g 2.65 oz	Approx. 50 g 1.77 oz	Approx. 110 g 3.88 oz	Approx. 85 g 3.00 oz	Approx. 175 g 6.18 oz	Approx. 150 g 5.30 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier Ultra-long distance unshielded type M8/M12 PNP output

Model		ER-U08P	ER-U08PC	ER-U08TPC ^8 ^9	ER-U12P	ER-U12PC	ER-U12TPC ^8 ^9
Image
Type		Ultra-long distance unshielded type Screw type M8 Cable PNP output	Ultra-long distance unshielded type Screw type M8 Connector (M8 3-pin) PNP output		Ultra-long distance unshielded type Screw type M12 Cable PNP output	Ultra-long distance unshielded type Screw type M12 Connector (M12 4-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1		2 m 6.6' ^*1	― ^*1
No. of control outputs		1				2
Output mode	Output 1	N.O.
	Output 2	―				N.C.
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	9 mm 0.35" ±10% ^*2			18 mm 0.71" ±10% ^*2
	With distance switching (Mode 2)	6 mm 0.24" ±10% ^*2			12 mm 0.47" ±10% ^*2
Response frequency	With default settings (Mode 1)	15 Hz ^3 ^4
	With distance switching (Mode 2)	45 Hz ^3 ^4			50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		27 × 27 mm 1.06" × 1.06"			54 × 54 mm 2.13" × 2.13"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)		750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*10	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)		1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V) ^*10
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions			1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, button: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz		Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 Long-body type. See “Dimensions” for details. ^10 For IO-Link-compatible devices listed under *1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier Ultra-long distance unshielded type M18/M30 PNP output

Model		ER-U18P	ER-U18PC ^*8	ER-U30P	ER-U30PC ^*8
Image
Type		Ultra-long distance unshielded type Screw type M18 Cable PNP output	Ultra-long distance unshielded type Screw type M18 Connector (M12 4-pin) PNP output	Ultra-long distance unshielded type Screw type M30 Cable PNP output	Ultra-long distance unshielded type Screw type M30 Connector (M12 4-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1	2	1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.	―	N.C.
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	32 mm 1.26" ±10% ^*2		52 mm 2.05" ±10% ^*2
	With distance switching (Mode 2)	22 mm 0.87" ±10% ^*2		32 mm 1.26" ±10% ^*2
Response frequency	With default settings (Mode 1)	10 Hz ^3 ^4
	With distance switching (Mode 2)	35 Hz ^3 ^4		20 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		96 × 96 mm 3.78" × 3.78"		156 × 156 mm 6.14" × 6.14"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, button: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 110 g 3.88 oz	Approx. 65 g 2.29 oz	Approx. 190 g 6.71 oz	Approx. 150 g 5.30 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier Ultra-long distance unshielded type NPN output

Model		ER-U08N	ER-U12N	ER-U18N	ER-U30N
Image
Type		Ultra-long distance unshielded type Screw type M8 Cable NPN output	Ultra-long distance unshielded type Screw type M12 Cable NPN output	Ultra-long distance unshielded type Screw type M18 Cable NPN output	Ultra-long distance unshielded type Screw type M30 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	9 mm 0.35" ±10% ^*2	18 mm 0.71" ±10% ^*2	32 mm 1.26" ±10% ^*2	52 mm 2.05" ±10% ^*2
	With distance switching (Mode 2)	6 mm 0.24" ±10% ^*2	12 mm 0.47" ±10% ^*2	22 mm 0.87" ±10% ^*2	32 mm 1.26" ±10% ^*2
Response frequency	With default settings (Mode 1)	15 Hz ^3 ^4		10 Hz ^3 ^4
	With distance switching (Mode 2)	45 Hz ^3 ^4	50 Hz ^3 ^4	35 Hz ^3 ^4	20 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		27 × 27 mm 1.06" × 1.06"	54 × 54 mm 2.13" × 2.13"	96 × 96 mm 3.78" × 3.78"	156 × 156 mm 6.14" × 6.14"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 50 mA or less for 1 output, or 50 mA or less in total for 2 outputs		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6		NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, button: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 75 g 2.65 oz	Approx. 110 g 3.88 oz	Approx. 190 g 6.71 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier General-purpose all-metal shielded type M8/M12 PNP output Long-Range

Model		ER-GL08P	ER-GL08PC	ER-GL08TPC ^8 ^9	ER-GL08P03C	ER-GL12P	ER-GL12PC	ER-GL12TPC ^8 ^9	ER-GL12P03C
Image
Type		General-purpose all-metal shielded type Screw type M8 Cable PNP output Long-Range	General-purpose all-metal shielded type Screw type M8 Connector (M8 3-pin) PNP output Long-Range		General-purpose all-metal shielded type Screw type M8 Connector with pigtail (M12 4-pin) PNP output Long-Range	General-purpose all-metal shielded type Screw type M12 Cable PNP output Long-Range	General-purpose all-metal shielded type Screw type M12 Connector (M12 4-pin) PNP output Long-Range		General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) PNP output Long-Range
Power supply cable length		2 m 6.6' ^*1	― ^*1		0.3 m 1.0' ^*1	2 m 6.6' ^*1	― ^*1		0.3 m 1.0' ^*1
No. of control outputs		1			2	1	2
Output mode	Output 1	N.O.
	Output 2	―			N.C.	―	N.C.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2				7 mm 0.28" ±10% ^*2
Response frequency		80 Hz ^3 ^4				100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"				21 × 21 mm 0.83" × 0.83"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)		750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*10	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)		1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V) ^*10	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions				1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, metal section of the housing: SUS303 (M30: SUS304), plastic section of the housing: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz		Approx. 40 g 1.41 oz	Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz		Approx. 50 g 1.77 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 Long-body type. See “Dimensions” for details. ^10 For IO-Linkcompatible devices listed under *1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier General-purpose all-metal shielded type M18/M30 PNP output Long-Range

Model		ER-GL18P	ER-GL18PC ^*8	ER-GL18P03C	ER-GL30P	ER-GL30PC ^*8	ER-GL30P03C
Image
Type		General-purpose all-metal shielded type Screw type M18 Cable PNP output Long-Range	General-purpose all-metal shielded type Screw type M18 Connector (M12 4-pin) PNP output Long-Range	General-purpose all-metal shielded type Screw type M18 Connector with pigtail (M12 4-pin) PNP output Long-Range	General-purpose all-metal shielded type Screw type M30 Cable PNP output Long-Range	General-purpose all-metal shielded type Screw type M30 Connector (M12 4-pin) PNP output Long-Range	General-purpose all-metal shielded type Screw type M30 Connector with pigtail (M12 4-pin) PNP output Long-Range
Power supply cable length		2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1
No. of control outputs		1	2		1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.		―	N.C.
Button		None
Button	Function	―
Detecting distance		10 mm 0.39" ±10% ^*2			20 mm 0.79" ±10% ^*2
Response frequency		50 Hz ^3 ^4			30 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"			60 × 60 mm 2.36" × 2.36"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)		PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, metal section of the housing: SUS303 (M30: SUS304), plastic section of the housing: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 110 g 3.88 oz	Approx. 65 g 2.29 oz	Approx. 85 g 3.00 oz	Approx. 175 g 6.18 oz	Approx. 140 g 4.94 oz	Approx. 150 g 5.30 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 For IO-Linkcompatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier General-purpose all-metal shielded type NPN output Long-Range

Model		ER-GL08N	ER-GL08N03C	ER-GL12N	ER-GL12N03C	ER-GL18N	ER-GL18N03C	ER-GL30N	ER-GL30N03C
Image
Type		General-purpose all-metal shielded type Screw type M8 Cable NPN output Long-Range	General-purpose all-metal shielded type Screw type M8 Connector with pigtail (M12 4-pin) NPN output Long-Range	General-purpose all-metal shielded type Screw type M12 Cable NPN output Long-Range	General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) NPN output Long-Range	General-purpose all-metal shielded type Screw type M18 Cable NPN output Long-Range	General-purpose all-metal shielded type Screw type M18 Connector with pigtail (M12 4-pin) NPN output Long-Range	General-purpose all-metal shielded type Screw type M30 Cable NPN output Long-Range	General-purpose all-metal shielded type Screw type M30 Connector with pigtail (M12 4-pin) NPN output Long-Range
Power supply cable length		2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1
No. of control outputs		1	2	1	2	1	2	1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.	―	N.C.	―	N.C.	―	N.C.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2		7 mm 0.28" ±10% ^*2		10 mm 0.39" ±10% ^*2		20 mm 0.79" ±10% ^*2
Response frequency		80 Hz ^3 ^4		100 Hz ^3 ^4		50 Hz ^3 ^4		30 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"		21 × 21 mm 0.83" × 0.83"		30 × 30 mm 1.18" × 1.18"		60 × 60 mm 2.36" × 2.36"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs				Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6				NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)		1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)		NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, metal section of the housing: SUS303 (M30: SUS304), plastic section of the housing: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP), housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 40 g 1.41 oz	Approx. 75 g 2.65 oz	Approx. 50 g 1.77 oz	Approx. 110 g 3.88 oz	Approx. 85 g 3.00 oz	Approx. 175 g 6.18 oz	Approx. 150 g 5.30 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier General-purpose all-metal shielded type M8 PNP output Mid-Range

Model		ER-GM08P	ER-GM08PC	ER-GM08P03C
Image
Type		General-purpose all-metal shielded type Screw type M8 Cable PNP output Mid-Range	General-purpose all-metal shielded type Screw type M8 Connector (M8 3-pin) PNP output Mid-Range	General-purpose all-metal shielded type Screw type M8 Connector with pigtail (M12 4-pin) PNP output Mid-Range
Power supply cable length		2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1
No. of control outputs		1		2
Output mode	Output 1	N.O.
	Output 2	―		N.C.
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2
Response frequency		120 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		8 × 8 mm 0.31" × 0.31"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: LCP/PBT, connector end: LCP/PBT, housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU/PVC, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 40 g 1.41 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier General-purpose all-metal shielded type M12 PNP output Short-Range/Mid-Range

Model		ER-GS12P	ER-GS12PC	ER-GS12P03C	ER-GM12P	ER-GM12PC	ER-GM12P03C
Image
Type		General-purpose all-metal shielded type Screw type M12 Cable PNP output Short-Range	General-purpose all-metal shielded type Screw type M12 Connector (M12 4-pin) PNP output Short-Range	General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) PNP output Short-Range	General-purpose all-metal shielded type Screw type M12 Cable PNP output Mid-Range	General-purpose all-metal shielded type Screw type M12 Connector (M12 4-pin) PNP output Mid-Range	General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) PNP output Mid-Range
Power supply cable length		2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	― ^*1	0.3 m 1.0' ^*1
No. of control outputs		1	2		1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.		―	N.C.
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2			4 mm 0.16" ±10% ^*2
Response frequency		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: LCP/PBT, connector end: LCP/PBT, housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU/PVC, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz	Approx. 50 g 1.77 oz	Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz	Approx. 50 g 1.77 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier General-purpose all-metal shielded type NPN output Short-Range/Mid-Range

Model		ER-GM08N	ER-GM08N03C	ER-GS12N	ER-GS12N03C	ER-GM12N	ER-GM12N03C
Image
Type		General-purpose all-metal shielded type Screw type M8 Cable NPN output Mid-Range	General-purpose all-metal shielded type Screw type M8 Connector with pigtail (M12 4-pin) NPN output Mid-Range	General-purpose all-metal shielded type Screw type M12 Cable NPN output Short-Range	General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) NPN output Short-Range	General-purpose all-metal shielded type Screw type M12 Cable NPN output Mid-Range	General-purpose all-metal shielded type Screw type M12 Connector with pigtail (M12 4-pin) NPN output Mid-Range
Power supply cable length		2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1	2 m 6.6' ^*1	0.3 m 1.0' ^*1
No. of control outputs		1	2	1	2	1	2
Output mode	Output 1	N.O.
	Output 2	―	N.C.	―	N.C.	―	N.C.
Button		None
Button	Function	―
Detecting distance		2 mm 0.08" ±10% ^*2				4 mm 0.16" ±10% ^*2
Response frequency		120 Hz ^3 ^4		150 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		8 × 8 mm 0.31" × 0.31"		12 × 12 mm 0.47" × 0.47"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)		1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, mounting thread: SUS303 (M30: SUS304), plastic section of the housing: PBT, nut: SUS304, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: LCP/PBT, connector end: LCP/PBT, housing: SUS303 Connector with cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC, plastic section of the connector: TPU/PVC, metal section of the connector: nickel-plated brass
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 40 g 1.41 oz	Approx. 75 g 2.65 oz	Approx. 50 g 1.77 oz	Approx. 75 g 2.65 oz	Approx. 50 g 1.77 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier Environment-resistant all-metal shielded type PNP output

Model		ER-GR08P	ER-GR08PC ^*8	ER-GR12P	ER-GR12PC ^*8	ER-GR18P	ER-GR18PC ^*8
Image
Type		Environment-resistant all-metal shielded type Screw type M8 Cable PNP output	Environment-resistant all-metal shielded type Screw type M8 Connector (M8 3-pin) PNP output	Environment-resistant all-metal shielded type Screw type M12 Cable PNP output	Environment-resistant all-metal shielded type Screw type M12 Connector (M12 4-pin) PNP output	Environment-resistant all-metal shielded type Screw type M18 Cable PNP output	Environment-resistant all-metal shielded type Screw type M18 Connector (M12 4-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1			2	1	2
Output mode	Output 1	N.O.
	Output 2	―			N.C.	―	N.C.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2		7 mm 0.28" ±10% ^*2		10 mm 0.39" ±10% ^*2
Response frequency		80 Hz ^3 ^4		100 Hz ^3 ^4		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"		21 × 21 mm 0.83" × 0.83"		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (-40 to -25°C -40°F to -13°F, +55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs				Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6				PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*9	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP68G (JIS C 0920), IP69K (DIN40050)
	Ambient temperature	-40 to +85°C -40°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G2 /Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and housing: SUS316L, nut: SUS316L, toothed metal washer: SUS316L Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP)
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz	Approx. 110 g 3.88 oz	Approx. 70 g 2.47 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier Environment-resistant all-metal shielded type NPN output

Model		ER-GR08N	ER-GR12N	ER-GR18N
Image
Type		Environment-resistant all-metal shielded type Screw type M8 Cable NPN output	Environment-resistant all-metal shielded type Screw type M12 Cable NPN output	Environment-resistant all-metal shielded type Screw type M18 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2	7 mm 0.28" ±10% ^*2	10 mm 0.39" ±10% ^*2
Response frequency		80 Hz ^3 ^4	100 Hz ^3 ^4	50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"	21 × 21 mm 0.83" × 0.83"	30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (-40 to -25°C -40°F to -13°F, +55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6		NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP68G (JIS C 0920), IP69K (DIN40050)
	Ambient temperature	-40 to +85°C -40°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G2 /Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and housing: SUS316L, nut: SUS316L, toothed metal washer: SUS316L Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP)
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 75 g 2.65 oz	Approx. 110 g 3.88 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Built-in amplifier Weld-resistant all-metal shielded type PNP output

Model		ER-GW08P	ER-GW08PC ^*8	ER-GW12P	ER-GW12PC ^*8	ER-GW18P	ER-GW18PC ^*8
Image
Type		Weld-resistant all-metal shielded type Screw type M8 Cable PNP output	Weld-resistant all-metal shielded type Screw type M8 Connector (M8 3-pin) PNP output	Weld-resistant all-metal shielded type Screw type M12 Cable PNP output	Weld-resistant all-metal shielded type Screw type M12 Connector (M12 4-pin) PNP output	Weld-resistant all-metal shielded type Screw type M18 Cable PNP output	Weld-resistant all-metal shielded type Screw type M18 Connector (M12 4-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1			2	1	2
Output mode	Output 1	N.O.
	Output 2	―			N.C.	―	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	3 mm 0.12" ±10% ^*2		7 mm 0.28" ±10% ^*2		10 mm 0.39" ±10% ^*2
	With distance switching (Mode 2)	1.5 mm 0.06" ±10% ^*2		3 mm 0.12" ±10% ^*2		5 mm 0.20" ±10% ^*2
Response frequency		2 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"		21 × 21 mm 0.83" × 0.83"		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (+55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs				Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6				PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V) ^*9	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V) ^*9	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*9
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +85°C -13°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² /Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and housing: SUS303 and ceramic coating, button: PBT, nut: SUS303 and ceramic coating, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP)
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 75 g 2.65 oz	Approx. 35 g 1.24 oz	Approx. 110 g 3.88 oz	Approx. 70 g 2.47 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 The upper limit of the UL temperature rating is +55°C. ^8 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^9 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V)

Back to top

Built-in amplifier Weld-resistant all-metal shielded type NPN output

Model		ER-GW08N	ER-GW12N	ER-GW18N
Image
Type		Weld-resistant all-metal shielded type Screw type M8 Cable NPN output	Weld-resistant all-metal shielded type Screw type M12 Cable NPN output	Weld-resistant all-metal shielded type Screw type M18 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	3 mm 0.12" ±10% ^*2	7 mm 0.28" ±10% ^*2	10 mm 0.39" ±10% ^*2
	With distance switching (Mode 2)	1.5 mm 0.06" ±10% ^*2	3 mm 0.12" ±10% ^*2	5 mm 0.20" ±10% ^*2
Response frequency		2 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"	21 × 21 mm 0.83" × 0.83"	30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (+55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6		NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +85°C -13°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² /Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and housing: SUS303 and ceramic coating, button: PBT, nut: SUS303 and ceramic coating, toothed metal washer: SUS304 Cable - Indicator: TPU, cable cap (M8 only): PBT, cable: PVC Connector - Indicator: PBT (M8: LCP), connector end: PBT (M8: LCP)
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 75 g 2.65 oz	Approx. 110 g 3.88 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55°C.

Back to top

Amplifier relay Compact all-metal shielded type Cylindrical/Screw type PNP output

Model		ER-M045P	ER-M045PC ^*7	ER-M05P	ER-M05PC ^*7	ER-M08LP	ER-M08LPC ^*7
Image
Type		Compact all-metal shielded type Cylindrical type ø4.5 Cable PNP output	Compact all-metal shielded type Cylindrical type ø4.5 Connector (M8 3-pin) PNP output	Compact all-metal shielded type Screw type M5 Cable PNP output	Compact all-metal shielded type Screw type M5 Connector (M8 3-pin) PNP output	Compact all-metal shielded type Screw type M8 L-shape Cable PNP output	Compact all-metal shielded type Screw type M8 L-shape Connector (M8 3-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		1.5 mm 0.06" ±10% ^*2				3 mm 0.12" ±10% ^*2
Response frequency		170 Hz ^3 ^4				80 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		5 × 5 mm 0.20" × 0.20"				9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (0 to +55°C 32°F to 131°F) ±15% or less of detecting distance at +25°C +77°F (-25 to 0°C -13°F to +32°F, +55 to +70°C 131°F to +158°F)				±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	960 mW or less (40 mA or less at 24 V, 60 mA or less at 16 V)	960 mW or less (40 mA or less at 24 V, 60 mA or less at 16 V) ^*8	960 mW or less (40 mA or less at 24 V, 60 mA or less at 16 V)	960 mW or less (40 mA or less at 24 V, 60 mA or less at 16 V) ^*8	910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V)	910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V) ^*8
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L Epoxy resin				SUS316L, PBT
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―		Nut: SUS303		Nut: SUS304 Toothed lock washer: SUS304
Accessories				Nut × 2		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 70 g 2.47 oz	Approx. 25 g 0.88 oz	Approx. 75 g 2.65 oz	Approx. 30 g 1.06 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^8 For IO-Link compatible models under *1, power consumption is as follows. ø4.5, M5 type: 1050 mW or less (44 mA or less at 24 V, 66 mA or less at 16 V), M8 L type, thin type t = 4.7 mm: 1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V), thin type t = 8 mm: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V)

Back to top

Amplifier relay Compact all-metal shielded type Thin type PNP output

Model		ER-M08FP	ER-M08FPC ^*7	ER-M18FP	ER-M18FPC ^*7
Image
Type		Compact all-metal shielded type Thin type t = 4.7 mm Cable PNP output	Compact all-metal shielded type Thin type t = 4.7 mm Connector (M8 3-pin) PNP output	Compact all-metal shielded type Thin type t = 8 mm Cable PNP output	Compact all-metal shielded type Thin type t = 8 mm Connector (M8 3-pin) PNP output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V)	910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V) ^*8	1010 mW or less (43 mA or less at 24 V, 64 mA or less at 16 V)	1010 mW or less (43 mA or less at 24 V, 64 mA or less at 16 V) ^*8
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L, PBT Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 125 g 4.41 oz	Approx. 80 g 2.82 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^7 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^8 For IO-Link compatible models under *1, power consumption is as follows. ø4.5, M5 type: 1050 mW or less (44 mA or less at 24 V, 66 mA or less at 16 V), M8 L type, thin type t = 4.7 mm: 1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V), thin type t = 8 mm: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V)

Back to top

Amplifier relay Compact all-metal shielded type Cylindrical/Screw type NPN output

Model		ER-M045N	ER-M045NC	ER-M05N	ER-M05NC	ER-M08LN	ER-M08LNC
Image
Type		Compact all-metal shielded type Cylindrical type ø4.5 Cable NPN output	Compact all-metal shielded type Cylindrical type ø4.5 Connector (M8 3-pin) NPN output	Compact all-metal shielded type Screw type M5 Cable NPN output	Compact all-metal shielded type Screw type M5 Connector (M8 3-pin) NPN output	Compact all-metal shielded type Screw type M8 L-shape Cable NPN output	Compact all-metal shielded type Screw type M8 L-shape Connector (M8 3-pin) NPN output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		1.5 mm 0.06" ±10% ^*2				3 mm 0.12" ±10% ^*2
Response frequency		170 Hz ^3 ^4				80 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		5 × 5 mm 0.20" × 0.20"				9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (0 to +55°C 32°F to 131°F) ±15% or less of detecting distance at +25°C +77°F (-25 to 0°C -13°F to +32°F, +55 to +70°C 131°F to +158°F)				±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	960 mW or less (40 mA or less at 24 V, 60 mA or less at 16 V)				910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions		500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L Epoxy resin				SUS316L, PBT
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―		Nut: SUS303		Nut: SUS304 Toothed lock washer: SUS304
Accessories				Nut × 2		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 70 g 2.47 oz	Approx. 25 g 0.88 oz	Approx. 75 g 2.65 oz	Approx. 30 g 1.06 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Back to top

Amplifier relay Compact all-metal shielded type Thin type NPN output

Model		ER-M08FN	ER-M08FNC	ER-M18FN	ER-M18FNC
Image
Type		Compact all-metal shielded type Thin type t = 4.7 mm Cable NPN output	Compact all-metal shielded type Thin type t = 4.7 mm Connector (M8 3-pin) NPN output	Compact all-metal shielded type Thin type t = 8 mm Cable NPN output	Compact all-metal shielded type Thin type t = 8 mm Connector (M8 3-pin) NPN output
Power supply cable length		2 m 6.6' ^*1	― ^*1	2 m 6.6' ^*1	― ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	910 mW or less (38 mA or less at 24 V, 57 mA or less at 16 V)		1010 mW or less (43 mA or less at 24 V, 64 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L, PBT Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 65 g 2.29 oz	Approx. 20 g 0.71 oz	Approx. 125 g 4.41 oz	Approx. 80 g 2.82 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Back to top

Specs Inductive Proximity Sensor ER series

Built-in amplifier Ultra-long distance shielded type M8/M12 PNP output

Built-in amplifier Ultra-long distance shielded type M18/M30 PNP output

Built-in amplifier Ultra-long distance shielded type NPN output

Built-in amplifier Ultra-long distance unshielded type M8/M12 PNP output

Built-in amplifier Ultra-long distance unshielded type M18/M30 PNP output

Built-in amplifier Ultra-long distance unshielded type NPN output

Built-in amplifier General-purpose all-metal shielded type M8/M12 PNP output Long-Range

Built-in amplifier General-purpose all-metal shielded type M18/M30 PNP output Long-Range

Built-in amplifier General-purpose all-metal shielded type NPN output Long-Range

Built-in amplifier General-purpose all-metal shielded type M8 PNP output Mid-Range

Built-in amplifier General-purpose all-metal shielded type M12 PNP output Short-Range/Mid-Range

Built-in amplifier General-purpose all-metal shielded type NPN output Short-Range/Mid-Range

Built-in amplifier Environment-resistant all-metal shielded type PNP output

Built-in amplifier Environment-resistant all-metal shielded type NPN output

Built-in amplifier Weld-resistant all-metal shielded type PNP output

Built-in amplifier Weld-resistant all-metal shielded type NPN output

Amplifier relay Compact all-metal shielded type Cylindrical/Screw type PNP output

Amplifier relay Compact all-metal shielded type Thin type PNP output

Amplifier relay Compact all-metal shielded type Cylindrical/Screw type NPN output

Amplifier relay Compact all-metal shielded type Thin type NPN output