Specs 3-Axis UV Laser Marker MD-U series

Head

Model		MD-U2010	MD-U2020	MD-U2050	MD-U2510	MD-U2520	MD-U2530
Image
Type		2.5 W type Standard area type Head	2.5 W type Wide area type Head	2.5 W type Small Spot type Head	7 W type Standard area type Head	7 W type Wide area type Head	7 W type Ultra wide area type Head
Marking laser	Output	3 W/40 kHz (output at contact point: 2.5 W)			8.5 W/40 kHz (output at contact point: 7 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1		-	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1		ー
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		125 × 125 × 42 mm 4.92"×4.92"×1.65"	330 × 330 × 42 mm 12.99"×12.99"×1.65"	50 × 50 × 10 mm 1.97"×1.97"×0.39"	125 × 125 × 42 mm 4.92"×4.92"×1.65"	330 × 330 × 42 mm 12.99"×12.99"×1.65"	660×660×100 mm 25.98”×25.98”×3.94”
Standard working distance (±variation width)		189 mm 7.44" (± 21 mm ± 0.83")	300 mm 11.81" (± 21 mm ± 0.83")	100 mm 3.94" (±5 mm ± 0.20")	189 mm 7.44" (± 21 mm ± 0.83")	300 mm 11.81" (± 21 mm ± 0.83")	660 mm 25.98” (±50mm ±1.97”)
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-AD-ZT		-	MD-AD-ZT		ー
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	2 (full-view camera/coaxial camera)		1 (coaxial camera)	2 (full-view camera/coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP64 (head part)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 21.7 kg 47.84 lb Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb		Controller: 9.7 kg 21.38 lb Head: 21.3 kg 46.96 lb Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb	Controller: 9.7 kg 21.38 lb Head: 22.9 kg 50.49 lb Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb		Controller: 9.7 kg 21.38 lb Head: 22.5 kg 49.60 Ib Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

Controller

Model		MD-U2000
Image
Type		Controller
Marking laser	Output	MD-U2010,MD-U2020,MD-U2050: 3 W/40 kHz (output at contact point: 2.5 W) MD-U2510,MD-U2520,MD-U2530: 8.5 W/40 kHz (output at contact point: 7 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		MD-U2010,MD-U2510: 125 × 125 × 42 mm 4.92"×4.92"×1.65" MD-U2020,MD-U2520: 330 × 330 × 42 mm 12.99"×12.99"×1.65" MD-U2050: 50 × 50 × 10 mm 1.97"×1.97"×0.39" MD-U2530: 660×660×100 mm 25.98”×25.98”×3.94”
Standard working distance (±variation width)		MD-U2010,MD-U2510: 189 mm 7.44" (± 21 mm ± 0.83") MD-U2020,MD-U2520: 300 mm 11.81" (± 21 mm ± 0.83") MD-U2050: 100 mm 3.94" (±5 mm ± 0.20") MD-U2530: 660 mm 25.98” (±50mm ±1.97”)
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-U2010,MD-U2020,MD-U2510,MD-U2520: MD-AD-ZT MD-U2050,MD-U2530: -
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	MD-U2010,MD-U2020,MD-U2510,MD-U2520,MD-U2530: 2 (full-view camera/coaxial camera) MD-U2050: 1 (coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP2X (controller part)
Rated voltage and power consumption		Single phase 100 to 240 VAC ±10%, 50/60 Hz, Max. 650 VA (With MD-U2010/2020/2050 connection: Up to 600 VA/270 W average; with MD-U2510/2520/2530 connection: Up to 650 VA/370 W average)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 21.7 kg 47.84 lb (MD-U2010,MD-U2020), 21.3 kg 46.96 lb (MD-U2050), 22.9 kg 50.49 lb (MD-U2510,MD-U2520), 22.5 kg 49.60 Ib (MD-U2530) Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

Model		MD-U1000C	MD-U1020C
Image
Type		Marking unit (controller + head) Standard area	Marking unit (controller + head) Wide area
Console		MC-P1 (sold separately)
2D code reader add-in		MD-XAD1/MD-XAD1A (sold separately)
Marking style		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) ^*1
	Wavelength	355 nm
	Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency		CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) ^*1
Marking area		125 x 125 x 42 mm 4.92" x 4.92" x 1.65"	330 x 330 x 42 mm 12.99" x 12.99" x 1.65"
Standard working distance (±variation width)		189 mm (±21 mm) 7.44" (±0.83")	300 mm (±21 mm) 11.81" (±0.83")
Marking resolution		2 µm	5 µm
Scan speed		Max. 12,000 mm/s 472.44"/s	Max. 8,000 mm/s 314.96"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
	Character size (height × width)	0.01 to 125 mm 0.004" to 4.92"	0.01 to 330 mm 0.004" to 12.99"
	Number of registered programs	2,000 max.
	Number of blocks	256
Input / Output		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) ^*3
Marking unit installation direction		All directions
Marking unit cable length		4.3±0.1 m 14.1' ±4"
Cooling method		Forced air cooling
Overvoltage category		II
Pollution degree		2
Enclosure rating		IP64 (marking head)
Rated voltage and power consumption		100 to 240 VAC ±10%, 50/60 Hz maximum 800 (VA)/average 250 (W)
Environmental resistance	Ambient temperature	0 to + 40 °C 32 °F to 104 °F
	Ambient temperature for storage	− 10 to + 60°C 14°F to 140°F (no freezing)
	Ambient humidity for storage	Up to 85% RH (no condensation)
	Relative humidity
Weight		Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations		EU directive (EMC directive, low-voltage directive, RoHS directive) , EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581) , CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1) , North America regulations (FCC Part 15B, ICES-001 Class A)
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel] . ^*3 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IP™ and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IP™ is either a registered trademark or a trademark of ODVA.