Top-of-the-line onboard profile processing capability
With 13 types of data extraction tools and 7 types of feature definition tools, a single LJ-V7000 can provide a total of 74 distinct measurement definitions. This allows a single system to provide the level of flexibility necessary to adapt to constant changes in production requirements.
Measures the height of a specified feature.
Makes a comparison with the registered master profile and then extracts the largest difference in height.
Measures the height difference from a reference feature to a specified feature.
Measures the radius of an arc segment.
Extracts the position coordinates of a specified feature.
Measures the thickness of a specified feature. (When using two sensor heads)
Measures the width of a specified feature.
Measures the angle between two specified lines or the angle from a single horizontal line.
Extracts the position coordinates of the center point for a specified feature.
Measures the cross-section area from a reference line or master profile.
Measures the distance between 2 features.
Provides a data output calculation based on other extractions.
Measures the distance from a reference line to a specified feature.
Any 16 dimensions can be measured simultaneously with a measurement mode that has been selected from the 74 types that are available. The LJ-V7000 can perform onboard profile analysis at a previously impossible rate.
Equipped with an easy 3D measurement function for height, height differences, and position. Not only is it possible to measure 2D cross-section profiles but it is also possible to easily measure scanned 3D data of the target.