Programmable Logic Controller

KV Nano series

Catalogs View Catalog

EtherNet/IP Compatible Communication Unit KV-EP02

KV-EP02 - EtherNet/IP Compatible Communication Unit

  • CE Marking
  • UL Listing(c/us)

Specifications

Model

KV-EP02

General specifications

Power voltage

24 VDC (+10%/-15%)

Operating ambient temperature

0 to +55°C 32 to 131°F (no freezing)*1*2

Operating ambient humidity

5 to 95% RH (No condensation)*1

Storage ambient temperature

-25 to +75°C -13 to 167°F

Storage relative humidity

5 to 95% RH (No condensation)*1

Operating environment

No dust or corrosive gas

Operating altitude

2000 m 6561.7' or less

Noise immunity

1500 Vp-p or more; pulse width: 1 μs, 50 ns (based on noise simulator);
IEC standard-compliant (IEC61000-4-2/3/4/6)

Withstand voltage

1500 VAC for 1 minute between the power terminals and the I/O terminals, and between the external terminals and the housing
(1000 VAC for 1 minute between the power supply terminal and output terminals for the transistor output type expansion I/O unit)

Insulation resistance

50 MΩ or more (between the power terminals and the input terminals and between the external terminals and the housing, with 500 VDC megohmmeter)

Vibration resistance

Intermittent vibration

Frequency 5 to 9 Hz

When mounted on a DIN rail: Half amplitude: 3.5 mm 0.14"*3

Frequency 9 to 150 Hz

When mounted on a DIN rail: Acceleration: 9.8 m/s2 32.2'/s2*3

Continuous vibration

Frequency 5 to 9 Hz

When mounted on a DIN rail: Half amplitude: 1.75 mm 0.07"*3

Frequency 9 to 150 Hz

When mounted on a DIN rail: Acceleration: 4.9 m/s2 16.1'/s2*3

Internal current consumption

120 mA or less*4

Shock resistance

When mounted on a DIN rail: Acceleration: 150 m/s2 492.1'/s2, Operation time: 11 ms, 3 times in each of the X, Y, and Z directions

Overvoltage category

I

Pollution degree

2

Weight

Approx. 130 g

Performance specifications

Connection interface

RJ-45 8-pole modular connector × 2 ports

Transmission rate

10BASE-T: 10 Mbps, 100BASE-TX: 100 Mbps*5

Transmission media

10BASE-T: Category 3 or higher UTP or STP (STP is recommended)
100BASE-TX: Category 5 or higher UTP or STP (STP is recommended)*6

Max. number of connectable hubs

10BASE-T: 4,100BASE-TX: 2*7

Maximum cable length

100 m 328.1'*8

EtherNet/IPTMspecifications

Trigger

Cyclic

Compliant functions

Cyclic communication, Message communication (explicit message communication), UCMM, and Class 3 support

Number of connections

64

EtherNet/IPTM specifications

RPI (Transmission cycle)

0.5 to 10000 ms (in units of 0.5 ms)

Conformance test

Compliant with CT14

*1 Guaranteed range in which the system can be used.
*2 The temperature below the unit center (30 mm 1.18") inside a control panel.
*3 Compliant with JIS B 3502 and IEC61131-2, No. of scans: 10 times in each of the X, Y, and Z directions (for 100 min.)
*4 The maximum current consumption including that of expansion units is 1.8 A.
*5 10 Mbps/100 Mbps MDI/MDI-X automatic switching function supported
*6 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable
*7 The maximum number of connection is not limited when an Ethernet switch is used.
*8 The maximum cable length refers to the distance between the KV-EP02 and the Ethernet switch.

Other Models