I want to prevent the screen from being changed when the user holds it down.

This section explains how to prevent the screen from being changed when the user holds it down.

Setting procedure

1. Hold down a part of the screen on which there are no switches.

2. The system menu appears. Tap [System Mode].

3. Tap [VT System Setup] -> [Gesture].

4. Set “Start page switching mode” and “Display system menu” to “Disable.”
After changing the settings, tap [VT System Setup] in the upper-left corner.

5. Tap [Run Mode] to save the changes.

With these settings, nothing is displayed when the screen is held down.

Back to list